How to Service an Air Bag Control Module on Dodge Viper?

Before handling the Occupant Restraint Controller, open the deck, remove the four bolts fastening the battery compartment cover and then take off the cover. Shut off the battery negative cable, giving the system two minutes to protect against possible injury during the replacement process. After that, take out the center console and the center bezel. Take a trim stick or some comparable tool and very carefully lift the cluster bezel. After that, remove the radio and its electric wires. Afterward, disconnect the two wires attached to the Occupant Restraint Controller and, from inside the center stack area, remove the three screws that hold it in place at the floor tunnel.

How to Install the Air Bag Control Module on Dodge Viper?

When placing the ORC, ensure it is not touching the passenger's feet, the air bag will go off in this scenario. Fasten the ORC to the model with three retaining screws and tighten them to 13.5 Nm (120 in. lbs.). Join the two connectors to the ORC. After that, slot in the cluster bezel, put the center bezel in place and finally fit the center console. You should not attach the battery negative cable until the system test is done to avoid serious or deadly injury. After that, attach the battery access cover and fix four bolts before closing the deck lid.

OEM Dodge Viper Air Bag Control Module

SRS Airbag Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Air Bag Control Modules found

View related parts
Dodge Viper SDM Module Part Number: 56038963AF
$446.42 MSRP: $679.00
You Save: $232.58 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Occupant Restraint; Air Bag Control Module; Module; Module Occupant Restraint
- Replaces: 56038963AE, 56038963AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2015 Dodge Viper | Base, GT, GTS | 10 Cyl 8.4 L GAS, 8.4L V10
View related parts
Dodge Viper SDM Module Part Number: 68303219AA
$593.39 MSRP: $899.00
You Save: $305.61 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Air Bag Control; Air Bag Control Module; Module; Module Air Bag Control
- Replaces: 68230542AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2017 Dodge Viper | ACR, GTC, GTS | 10 Cyl 8.4 L GAS, 8.4L V10
View related parts
Dodge Viper Control Module Part Number: 68290974AA
$173.35 MSRP: $256.00
You Save: $82.65 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Occupant Restraint; Air Bag Control Module; Diagnostic Unit
- Replaces: 4865582AB, 4865582AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Viper | SRT-10 | 10 Cyl 8.3 L GAS, 8.3L V10
View related parts
Dodge Viper Control Module Part Number: 4896069AE
$177.53 MSRP: $233.00
You Save: $55.47 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Occupant Restraint; Air Bag Seat Sensor Mat; Occupant Module; Module Occupant Restraint
- Replaces: 4896069AC, 4896069AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Dodge Viper | SRT-10, SRT-10 ACR | 10 Cyl 8.4 L GAS
View related parts
Dodge Viper Module Part Number: 4896038AC
$118.97 MSRP: $148.00
You Save: $29.03 (20%)
Product Specifications
- Other Name: Module - Occupant Classification; Air Bag Impact Sensor; Module Occupant Classification
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Viper | SRT-10, SRT-10 ACR | 10 Cyl 8.4 L GAS
View related parts
Dodge Viper Control Module Part Number: 4896069AF
Product Specifications
- Other Name: Module - Occupant Restraint; Air Bag Seat Sensor Mat; Occupant Module; Module Occupant Restraint
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Viper | SRT-10, SRT-10 ACR | 10 Cyl 8.4 L GAS
View related parts
Dodge Viper Control Module Part Number: 4848802AE
Product Specifications
- Other Name: Module - Air Bag Control; Module Air Bag Control
- Replaces: 4848802AB, 4848802AC, 4848802AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2002 Dodge Viper | ACR, GT2, GTS, R/T-10 | 10 Cyl 8.0 L GAS, 8.0L V10

Dodge Viper Air Bag Control Module

Choose OEM Air Bag Control Module that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Air Bag Control Module follows strict manufacturing steps to lock in quality and fit. If your Dodge Viper matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Viper parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Viper Air Bag Control Module Parts and Q&A

Module
4896038AC
Q: How to Service an Air Bag Control Module on Dodge Viper?
A:
Before handling the Occupant Restraint Controller, open the deck, remove the four bolts fastening the battery compartment cover and then take off the cover. Shut off the battery negative cable, giving the system two minutes to protect against possible injury during the replacement process. After that, take out the center console and the center bezel. Take a trim stick or some comparable tool and very carefully lift the cluster bezel. After that, remove the radio and its electric wires. Afterward, disconnect the two wires attached to the Occupant Restraint Controller and, from inside the center stack area, remove the three screws that hold it in place at the floor tunnel.
Control Module
4896069AF
Q: How to Install the Air Bag Control Module on Dodge Viper?
A:
When placing the ORC, ensure it is not touching the passenger's feet, the air bag will go off in this scenario. Fasten the ORC to the model with three retaining screws and tighten them to 13.5 Nm (120 in. lbs.). Join the two connectors to the ORC. After that, slot in the cluster bezel, put the center bezel in place and finally fit the center console. You should not attach the battery negative cable until the system test is done to avoid serious or deadly injury. After that, attach the battery access cover and fix four bolts before closing the deck lid.