JeepParts
My Garage
My Account
Cart
OEM Dodge Wiper Pulse Module
Windshield Wiper Motor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Wiper Pulse Modules found
Dodge Wiper Motor Part Number: 55077098AL
$329.70 MSRP: $486.00You Save: $156.30 (33%)Product Specifications- Other Name: Module - Windshield; Windshield Wiper Motor; Wiper Linkage; Module Wiper
- Replaces: 55077098AK, 55077098AJ, 55077098AI, 55077098AH
Dodge Intermittent Wiper Module Part Number: 4661297
Product Specifications- Other Name: Module - Wiper; Rear Wiper & Washer
Dodge Intermittent Relay Part Number: 56021564AB
Product Specifications- Other Name: Module - Intermittent Wiper; Module Intermittent Wiper System
Dodge Wiper Motor Part Number: 4805249AD
Product Specifications- Other Name: Wiper Module - Wiper; Windshield Wiper Motor; Wiper Linkage; Motor & Linkage; Module Wiper
- Replaces: 4805249AC
Dodge Wiper Pulse Module
OEM parts sourced directly from Dodge deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Dodge Wiper Pulse Module for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.
Dodge Wiper Pulse Module Parts and Q&A
- Q: How to Remove the Wiper Pulse Module on Dodge Ram 1500?A:The wiper module can be removed first by taking off both wiper arms from the wiper pivots. Then, lift and open the hood and unhook the battery's negative cable. Go ahead and take off the grille panel that is on top of the cowl plenum. Take the left headlamp and dash wire harness connector off the wiper motor pigtail wire connector. Take out the two screws that hold the wiper module to the top of the cowl plenum panel at the pivot brackets and then remove the screw securing it to the bottom. Remove the entire wiper module from the cowl panel plenum to finish this step.
- Q: How is the Wiper Pulse Module serviced without the Vehicle Theft Security System (VTSS) on Dodge Ram 1500 Van?A:Vehicles that lack the Vehicle Theft Security System (VTSS) depend on the intermittent wipe module. Servicing should not start until the air bag system is isolated by disconnecting and isolating the battery negative cable and allowing it to discharge for two minutes. First, remove the battery negative terminal and then bring the glove box down from the dashboard using the door. From the glove box's opening, put your hand through and over it, grab the intermittent wipe module and push it toward the front of your vehicle to release it from the mount. Move the module down into the glove box, unplug the wire harness hatch from the module and then remove the whole module. After that, slide the module back into the glove box opening and attach the wire harness connector. Line up the module's housing slot with the bracket tab, tug the module towards the back of the vehicle until you hear it snap into place with a click, restore the glove box and reconnect the negative battery cable last.
Related Dodge Parts
Dodge Fuse
Dodge Fuse Box
Dodge Distributor Cap
Dodge Fuel Pump Relay
Dodge Relay
Dodge Ignition Lock Cylinder
Dodge Intake Manifold Temperature Sensor
Dodge Parking Assist Distance Sensor
Dodge Relay Block
Dodge Transmitter
Dodge Washer Pump
Dodge Wiper Switch