OEM Jeep Balance Shaft Chain

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Balance Shaft Chains found

View related parts
Jeep Timing Chain Part Number: 4884870AB
$50.62 MSRP: $74.35
You Save: $23.73 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Chain - Balance Shaft; Engine Oil Pump Chain; Chain; Chain Balance Shaft
Fits the following Jeep Models:
- Compass | 2007-2017 | 75th Anniversary, Altitude, Base, High Altitude, Latitude, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Patriot | 2007-2017 | 75th Anniversary, Latitude, Latitude X, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Timing Chain Part Number: 4884452AA
$25.99 MSRP: $38.55
You Save: $12.56 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Chain - Balance Shaft; Balance Shaft Chain; Drive Chain; Chain; Chain Balance Shaft
- Replaces: 4621996
Fits the following Jeep Models:
- Liberty | 2002-2005 | Sport | 2.4L L4, 4 Cyl 2.4 L GAS
- Wrangler | 2003-2006 | SE | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Jeep Chain Part Number: 5047659AA
$45.66 MSRP: $67.15
You Save: $21.49 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Chain - Balance Shaft; Balance Shaft Chain; Chain Balance Shaft
Fits the following Jeep Models:
- Cherokee | 2014-2023 | 75th Anniversary, 80th Anniversary, Altitude, Altitude Lux, High Altitude, Latitude, Latitude Plus, Limited, Overland, Sport, Trailhawk | 4 Cyl 2.4 L GAS
- Compass | 2017-2022 | 80th Anniversary, Altitude, High Altitude, Latitude, Latitude Lux, Limited, Red, Sport, Trailhawk, Upland | 4 Cyl 2.4 L GAS
- Renegade | 2015-2021 | 75th Anniversary, 80th Anniversary, Altitude, Dawn Of Justice, Islander, Jeepster, Latitude, Limited, Sport, Trailhawk, Upland | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View More

Jeep Balance Shaft Chain

OEM parts sourced directly from Jeep deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Jeep Balance Shaft Chain for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

Jeep Balance Shaft Chain cancels the undesirable vibrations in the engine quietly such that the car does not vibrate even when traveling through rocky roads. A Jeep is distinctive because of good four wheel drive, high ground clearance and open top feeling that beckons a driver to an open air and a faraway horizon. The rough skid plates keep the important components out of the rocks and the serious ruts. The contemporary Jeep dashboards integrate touch screens, voice messages, and quick over the air, ensuring adventure is on the move. Selec-Terrain switch allows a Jeep owner to twist snow, sand, and mud and be sure of performing on any terrain. Furthermore, in addition to the hardware, there is an engaged Jeep community that exchanges trails, tips, and meetups to bring social enjoyment to each adventure. The Balance Shaft Chain is a chain of high strength steel connects that bind the crankshaft to the rotating shafts of timing so as to cancel the secondary vibrations and reduce the noise level. Installation of a new Balance Shaft Chain will require one to first park level, apply the brake and disconnect the battery. Take off components and the cover on the front, turn the engine to top dead and check the match marks. Loss the worn chain with its guides and tensioner. Wipe the fresh Balance Shaft Chain with oil, slip it over the crank balance sprockets and the balance sprocket, install guides, pump the tensioner, and release it. Turn the crank twice, ensure that the marks are in place, replace gaskets, refill fluids, and turn the engine on to ensure its quiet running.