How Can Brake Drum Machining on a Drum Lathe Prevent Taper and Surface Variation on Jeep Cherokee?

When brake drums require new machining, do so on a drum lathe, limiting your first cuts to 0.12 - 0.20 mm (0.005 - 0.008 inch) and saving the fine cuts for another step, at between 0.025 and 0.038 mm (0.001 and 0.0015 inch) for best results. Always make certain the drum is firmly supported in the lathe and secure it with a strap which helps to control vibration and reduce chatter. The allowable diameter of the surface used for the drum brake is found at the drum's outer edge and is either stamped or cast in. If machining the drum might increase its diameter above this allowable limit, it must be replaced.

OEM Jeep Cherokee Brake Drum

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Drums found

View related parts
Jeep Cherokee Brake Drum Part Number: 52007502AB
Product Specifications
- Other Name: Drum - Brake; Drum
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1991-2001 Jeep Cherokee | Base, Briarwood, Classic, Country, Laredo, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
Jeep Cherokee Drum, Rear Part Number: 52005350AC
Product Specifications
- Other Name: Drum - Brake; Brake Drum, Rear; Brake Drum
- Position: Rear
- Replaces: 52005350
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990-2001 Jeep Cherokee | Base, Briarwood, Classic, Country, Laredo, Limited, Pioneer, SE, Sport | 2.1L L4, 2.5L L4, 4 Cyl 2.5 L GAS, 4.0L L6, 6 Cyl 4.0 L GAS

Jeep Cherokee Brake Drum

Choose OEM Brake Drum that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Brake Drum follows strict manufacturing steps to lock in quality and fit. If your Jeep Cherokee matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Cherokee parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

A brake drum, also known as Jeep Cherokee Brake Drum, is one of the crucial parts of the braking mechanism, trusted for its efficiency for numerous Cherokee models. This is usually made of special cast iron and is majorly involved in reducing or preventing the movement of the vehicle through use of friction. During the brake operation, brake lining applies radial force against the inner periphery of the Brake Drum in order to produce the needed friction to slow down the Jeep Cherokee. Heat conduction and wear-resistance characteristics are applied to the manufacture of the Brake Drum so that the Brake Drum is capable of handling this heat which in turn will is responsible for increasing both the Brake Drum's efficiency and safety. Jeep has remodelled Cherokee since its first model within 1974 and still retains the label of a sturdy SUV. The Brake Drum has also expanded its types in order to fit into the style and type of Cherokee produced at different years. Such flexibility when incorporated with the zeal that Jeep Cherokee has for performance easily makes the Brake Drum to stand out in the market. Also, whereas reflecting on the utility of Jeep Cherokee it is evident that the automobile has safety enhancing features such as anti-lock brakes, electronic stability, and therefore underlining the value of a quality Brake Drum. All in all, the Jeep Cherokee Brake Drum is a valuable addition to the vehicle and its functions definitely improve the driving experience, that's why jeep SUVS are so loved.

Jeep Cherokee Brake Drum Parts and Q&A

Drum, Rear
52005350AC
Q: How Can Brake Drum Machining on a Drum Lathe Prevent Taper and Surface Variation on Jeep Cherokee?
A:
When brake drums require new machining, do so on a drum lathe, limiting your first cuts to 0.12 - 0.20 mm (0.005 - 0.008 inch) and saving the fine cuts for another step, at between 0.025 and 0.038 mm (0.001 and 0.0015 inch) for best results. Always make certain the drum is firmly supported in the lathe and secure it with a strap which helps to control vibration and reduce chatter. The allowable diameter of the surface used for the drum brake is found at the drum's outer edge and is either stamped or cast in. If machining the drum might increase its diameter above this allowable limit, it must be replaced.