How to Replace the Front Windshield Washer Pump on Jeep Cherokee?

Before changing the front washer pump/motor, cut off power from the negative cable of the battery and support the car by raising it. Take off the inside splash shield located in the left front fender wheelhouse. Take the supply hose off the front pump/motor barbed nipple which lets the washer fluid drain into a different, clean container. Remove the headlamp and dash wire harness connector from the washer pump/motor connector receptacle. To loosen the barbed inlet nipple at the front washer pump/motor unit, hold the nipple with a trim stick or any wide flat-bladed tool and carefully pry it out of the rubber grommet in the tub. Take out the front washer pump/motor unit and toss the rubber seal in the mounting hole of the washer reservoir. When you install, put a new rubber seal in the hole, place the tube of the pump or motor at the back of the water tank and push the nipple straight into the rubber grommet, checking the reservoir isn't damaged. Connect the disconnected headlamp and dash wire harness to the washer pump/motor connector receptacle and then hook the other end of the washer supply hose to the front washer pump/motor barbed outlet. Screw back the splash shield, lower the vehicle, join the negative cable of the battery and fill the washer container with washer solution.

How to Maintain a Windshield Washer Pump on Jeep Cherokee?

You should start by unplugging the battery's negative cable when serving the windshield washer pump. After that, support and raise the vehicle and disconnect the left front inner wheelhouse splash shield. Lift away the washer supply hose(s) from the barbed outlet nipple of the washer pump(s) and empty the washer fluid from the reservoir into a clean container. Take the wires out of the washer pump(s) connectors. Gently lift the barbed inlet part of the washer pump out of the grommet in the reservoir by prying with a trim stick or similar flat bladed tool. Lift the rubber grommet seal out of the reservoir and throw it away. First, reverse how you removed the reservoir and use a fresh rubber grommet seal in the area.

OEM Jeep Cherokee Windshield Washer Pump

Washer Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Windshield Washer Pumps found

View related parts
Jeep Cherokee Washer Pump Part Number: 5152030AA
$20.46 MSRP: $29.95
You Save: $9.49 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Grommet - Windshield Washer Pump; Windshield Washer Pump Grommet; Washer Pump Grommet; Grommet; Grommet Windshield Washer Pump Pump Grommet; Grommet Windshield Washer Pump
- Replaces: 68225069AA, 68145029AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2018 Jeep Cherokee | 75th Anniversary, Latitude, Latitude Plus, Limited, Overland, Sport, Trailhawk | 2.4L L4, 3.2L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.2 L GAS
View related parts
Jeep Cherokee Washer Pump Part Number: 68225066AB
$42.53 MSRP: $63.00
You Save: $20.47 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump - Washer, Windshield; Windshield Washer Pump; Washer Pump Repair Kit; Pump Washer, Windshield
- Replaces: 68225066AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2018 Jeep Cherokee | 75th Anniversary, Latitude, Latitude Plus, Limited, Overland, Sport, Trailhawk | 2.4L L4, 3.2L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.2 L GAS
View related parts
Jeep Cherokee Washer Pump Part Number: 4778347
$141.13 MSRP: $178.90
You Save: $37.77 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Washer, Windshield; Windshield Washer Pump; Front Washer Pump; Pump Washer, Windshield; Pump, Washer
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2001 Jeep Cherokee | Classic, Country, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
Jeep Cherokee Washer Pump Part Number: 68406292AA
$37.07 MSRP: $54.95
You Save: $17.88 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump - Washer, Windshield; Windshield Washer Pump; Washer Pump Repair Kit; Pump Washer, Windshield
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2019-2023 Jeep Cherokee | 80th Anniversary, Altitude, Altitude Lux, High Altitude, Latitude, Latitude Lux, Latitude Plus, Limited, Overland, Trailhawk, Trailhawk Elite, Upland, X | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.2 L GAS
View related parts
Jeep Cherokee Washer Pump Part Number: 4778348
Product Specifications
- Other Name: Motor - Washer, Windshield; Windshield Washer Pump; Rear Washer Pump; Pump Washer, Windshield; Pump, Washer
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2001 Jeep Cherokee | Classic, Country, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
Jeep Cherokee Washer Pump Part Number: 55154613
Product Specifications
- Other Name: Motor - Washer, Windshield; Washer Pump Repair Kit; Windshield Washer Pump; Front Washer Pump; Rear Washer Pump; Pump, Washer
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1992-1996 Jeep Cherokee | Base, Briarwood, Classic, Country, Laredo, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
Jeep Cherokee Washer Pump Part Number: 36001132
Product Specifications
- Other Name: Motor - Washer, Windshield; Rear Washer Pump; Pump, Washer
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1984-1995 Jeep Cherokee | Base, Briarwood, Chief, Country, Laredo, Limited, Pioneer, SE, Sport | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS

Jeep Cherokee Windshield Washer Pump

Choose OEM Windshield Washer Pump that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Windshield Washer Pump follows strict manufacturing steps to lock in quality and fit. If your Jeep Cherokee matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Cherokee parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Windshield Washer Pump of Jeep Cherokee is a part designed to send cleaning fluid from the internal reservoir to the spray nozzles so the windshield stays clean and, thus, ensures safe driving. The Windshield Washer Pump sits beside the fluid container under the hood. The pump uses an electric motor that creates pressure to force the liquid with the help of little hoses to the nozzles. These nozzles are situated near the glass. When the driver presses the internal control, the pump activates and forces a metered jet onto the windscreen, which is immediately wiped by the wipers to remove water, dirt, or debris. This arrangement allows for an unblocked perspective of every Jeep Cherokee, which makes it unnecessary to stop the vehicle. The Windshield Washer Pump is the primary moving element in the washer, while the wiper motor with blades and rubber inserts effects mechanical wiping. Fluid will not reach the nozzles if the Windshield Washer Pump is defective, and the spray may spray onto the windscreen glass informing for replacement of pump. This small electric part is installed to every Jeep Cherokee and the proper working of the Windshield Washer Pump keeps the Jeep Cherokee windshield clean in all weathers.

Jeep Cherokee Windshield Washer Pump Parts and Q&A

Washer Pump
4778348
Q: How to Replace the Front Windshield Washer Pump on Jeep Cherokee?
A:
Before changing the front washer pump/motor, cut off power from the negative cable of the battery and support the car by raising it. Take off the inside splash shield located in the left front fender wheelhouse. Take the supply hose off the front pump/motor barbed nipple which lets the washer fluid drain into a different, clean container. Remove the headlamp and dash wire harness connector from the washer pump/motor connector receptacle. To loosen the barbed inlet nipple at the front washer pump/motor unit, hold the nipple with a trim stick or any wide flat-bladed tool and carefully pry it out of the rubber grommet in the tub. Take out the front washer pump/motor unit and toss the rubber seal in the mounting hole of the washer reservoir. When you install, put a new rubber seal in the hole, place the tube of the pump or motor at the back of the water tank and push the nipple straight into the rubber grommet, checking the reservoir isn't damaged. Connect the disconnected headlamp and dash wire harness to the washer pump/motor connector receptacle and then hook the other end of the washer supply hose to the front washer pump/motor barbed outlet. Screw back the splash shield, lower the vehicle, join the negative cable of the battery and fill the washer container with washer solution.
Washer Pump
4778347
Q: How to Maintain a Windshield Washer Pump on Jeep Cherokee?
A:
You should start by unplugging the battery's negative cable when serving the windshield washer pump. After that, support and raise the vehicle and disconnect the left front inner wheelhouse splash shield. Lift away the washer supply hose(s) from the barbed outlet nipple of the washer pump(s) and empty the washer fluid from the reservoir into a clean container. Take the wires out of the washer pump(s) connectors. Gently lift the barbed inlet part of the washer pump out of the grommet in the reservoir by prying with a trim stick or similar flat bladed tool. Lift the rubber grommet seal out of the reservoir and throw it away. First, reverse how you removed the reservoir and use a fresh rubber grommet seal in the area.