How to Remove and Replace a Rear Brake Caliper on Jeep Commander?

Start by putting a prop rod on the brake pedal and leave it in place to hold the pressure in the brake system while you take out and put in the back up brake caliper. Then, raise and prop up your vehicle and take off the rear wheel and its tire from underneath. It's important to sink a little fluid from the master cylinder reservoir using a clean suction gun. Squash the caliper pistons down into the caliper and while they are still in position, remove the banjo bolt and give up the gasket washers. Unscrew and remove the slide pins, the caliper from the anchor and then take the brake pads out.

How to Install a Brake Caliper on Jeep Commander?

First, screw in the brake caliper adapter mounting bolts to 169 Nm (125 ft.lbs). After that, place the inboard and outboard pads and after them, the caliper. Lastly, mount the tire and wheel to your vehicle.

OEM Jeep Commander Brake Caliper

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Brake Calipers found

View related parts
Jeep Commander Caliper Assembly, Rear Driver Side Part Number: 5143703AC
$123.14 MSRP: $184.00
You Save: $60.86 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Left; Brake Caliper; Caliper
- Position: Rear Driver Side
- Replaces: 5143703AA, 5143703AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Caliper Assembly Part Number: 5143702AB
$89.90 MSRP: $132.00
You Save: $42.10 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Brake Caliper; Caliper; Caliper Assembly Disc Brake Rear
- Replaced by: 5143702AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Caliper, Rear Passenger Side Part Number: 5143702AC
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Right; Brake Caliper
- Position: Rear Passenger Side
- Replaces: 5143702AB, 5143702AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Caliper Assembly, Front Passenger Side Part Number: 5143692AC
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Right; Brake Caliper; Caliper
- Position: Front Passenger Side
- Replaces: 5143692AA, 5143692AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Caliper Assembly, Front Driver Side Part Number: 5143693AC
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Left; Brake Caliper; Caliper
- Position: Front Driver Side
- Replaces: 5143693AB, 5143693AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

Jeep Commander Brake Caliper

Choose OEM Brake Caliper that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Brake Caliper follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Jeep Commander Brake Caliper is a very essential vehicle part applied to Jeep Commander cars and known for its quality and efficiency. This essential part translate hydraulic pressure of the master cylinder to mechanical force and make sure the brake pads apply pressure on the rotors and ensure that the car slows or stops to the required speed. Jeep Commanders utilize two primary types of brake calipers: Stationary and Floating type both are developed for obtaining maximum braking performance. In the fixed application, they also include multiple-piston fixed and floating applications, which provide constant pressure in varying forms. Made from material such as cast iron and steel, Jeep Commander Brake Caliper stands up to the task as a result of its durability. It requires the right care so that these brake calipers should not leak or face wear and tear problems that can be dangerous. These high-performance brake calipers specifically apply and benefit the Jeep Commander in the kind of models like the XK and the new model, the 2022 Jeep Meridian. That is, the Commander Brake Caliper has prominent features in the realm of automobiles because of the product's durability and the extra-capability to be tuned up for better stopping power. The Commander Brake Caliper hence stands tall among Jeep brands owing to its reliability to offer comfort in driving to drivers making it a must-have part of Jeep cars.

Jeep Commander Brake Caliper Parts and Q&A

Caliper Assembly
5143702AB
Q: How to Remove and Replace a Rear Brake Caliper on Jeep Commander?
A:
Start by putting a prop rod on the brake pedal and leave it in place to hold the pressure in the brake system while you take out and put in the back up brake caliper. Then, raise and prop up your vehicle and take off the rear wheel and its tire from underneath. It's important to sink a little fluid from the master cylinder reservoir using a clean suction gun. Squash the caliper pistons down into the caliper and while they are still in position, remove the banjo bolt and give up the gasket washers. Unscrew and remove the slide pins, the caliper from the anchor and then take the Brake Pads out.
Caliper Assembly, Rear Driver Side
5143703AC
Q: How to Install a Brake Caliper on Jeep Commander?
A:
First, screw in the brake caliper adapter mounting bolts to 169 Nm (125 ft.lbs). After that, place the inboard and outboard pads and after them, the caliper. Lastly, mount the tire and wheel to your vehicle.