How to Install a Brake Light Switch on Jeep Commander?

Before you install the brake lamp switch, disconnect the negative cable from the battery, isolate it and allow the system two minutes to discharge. Move the brake lamp switch plunger all the way in, then insert the wire harness connector into the switch. Keep pressing on the brake pedal and guide the locking collar so that its tabs overlap the keyed hole in the bracket. Once the holes meet, insert the tab into the hole until the switch sits right against the bracket. Turn the switch housing counterclockwise about 270 degrees to press the tabs against the mounting bracket, making sure the brakes aren't beyond a pull of 9 kilograms (20 pounds). Press the brake pedal down and release it, then lightly raise it up to its proper place so the plunger moves with a ratcheting noise. At the end, put on the steering column opening cover and fasten the battery negative cable into place.

OEM Jeep Commander Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
Jeep Commander Lamp Switch Part Number: 56054001AD
$37.64 MSRP: $54.10
You Save: $16.46 (31%)
ADD TO CART
Product Specifications
- Other Name: Switch - Stop Lamp; Brake Light Switch; Stoplamp Switch; Switch; Switch Stop Lamp
- Replaces: 56054001AB, 56054001AC, 56054001AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

Jeep Commander Brake Light Switch

Choose OEM Brake Light Switch that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Brake Light Switch follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Jeep Commander Brake Light Switch is one of the significant parts that is worth to focus and emphasizes the Jeep vehicles' reliability and performance. This switch is central to the process of getting the brake light on as soon as the brake pedal is touched, thereby enabling motorists behind the jeep commander to be immediately informed of any slowing down or stopping. It greatly improves road safety, and that is why the Jeep Commander can be recommended for families and travelers. Sieved for use with different Commander models such as the XK and the 2022 Meridian, the Brake Light Switch has maintained a similar look in ensuring proper transmission of information on the road. This makes it possible for it to be more enduring to the challenges of everyday usage therefore expanding its reliability credentials. The Jeep Commander Brake Light Switch plays what may be seen as a safety and performance role in any vehicle through ensuring proper functioning of brake lights hence less accidents. Also, easy integration of the switch into the electrical system of the Jeep Commander is evident of good engineering. Among the functions of the Jeep Commander Brake Light Switch, some specific characteristics can be easily distinguished in the auto industry - the car's prompt reaction and sturdiness. In conclusion, this significant part describes how Jeep vehicle manufactures pays much attention to the safety and performance of vehicles and it is one of the essential features of the Jeep Commander.

Jeep Commander Brake Light Switch Parts and Q&A

Lamp Switch
56054001AD
Q: How to Install a Brake Light Switch on Jeep Commander?
A:
Before you install the brake lamp switch, disconnect the negative cable from the battery, isolate it and allow the system two minutes to discharge. Move the brake lamp switch plunger all the way in, then insert the wire harness connector into the switch. Keep pressing on the brake pedal and guide the locking collar so that its tabs overlap the keyed hole in the bracket. Once the holes meet, insert the tab into the hole until the switch sits right against the bracket. Turn the switch housing counterclockwise about 270 degrees to press the tabs against the mounting bracket, making sure the brakes aren't beyond a pull of 9 kilograms (20 pounds). Press the brake pedal down and release it, then lightly raise it up to its proper place so the plunger moves with a ratcheting noise. At the end, put on the steering column opening cover and fasten the battery negative cable into place.