How to Service the Headlight Switch on the Left Multifunction Control on Jeep Commander?

Disconnect the battery negative wire, disable the SRS and allow the system's capacitor two minutes to safely discharge before proceeding with your service. The first step is to take off the upper and lower shrouds on the steering column. Following that, remove the wire harness connector from the multi-function switch found on the left. Take out the screw that holds the left multi-function switch to the bracket on the left of the Clock Spring. Slide the switch toward the case wall to remove the slide tabs at the ends of the switch housing from the channel formations in the bracket. Following this, separate the jumper wire harness connector from the left multi-function switch's inboard end and take out the switch from the Clock Spring.

How to Install the Headlight Switch on the Left Multifunction Unit on Jeep Commander?

Always disable the SRS by cutting and separating the negative battery cable and let the system capacitor empty for two minutes before continuing the installation. Put the left multi-function switch right next to the Clock Spring's mounting bracket in order to attach the connector on the jumper wire harness to the switch. L line up the tabs on the switch housing with the channels on the Clock Spring mounting bracket and push the switch until it's flush with the bracket. Loop the mounting tab on the front of the left multi-function switch over the mounting bracket on the Clock Spring and tighten it with the screw. Move the wire harness connector from the switch housing and plug it back into the instrument panel. After that, secure the lower and upper shrouds around the steering column and reattach the battery negative cable.

OEM Jeep Commander Headlight Switch

Headlamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Headlight Switches found

View related parts
Jeep Commander Turn Signal Switch Part Number: 68015101AG
$89.70 MSRP: $135.00
You Save: $45.30 (34%)
ADD TO CART
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Housing; Multi Purpose Switch; Multifunction Switch; Headlamp Switch; Switch Multifunction
- Replaces: 68015101AE, 68015101AD, 68015101AC, 68015101AF, 68015101AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Jeep Commander | Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Turn Signal Switch Part Number: 5143313AF
$147.11 MSRP: $221.00
You Save: $73.89 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Housing; Multi Purpose Switch; Headlamp Switch; Switch Multifunction
- Replaces: 5143313AC, 5143313AE, 5143313AB, 5143313AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Turn Signal Switch Part Number: 68041485AD
$112.62 MSRP: $172.00
You Save: $59.38 (35%)
ADD TO CART
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Housing; Multi Purpose Switch; Multifunction Switch; Headlamp Switch; Signal Switch; Switch Multifunction
- Replaces: 5183947AC, 68041485AA, 68041485AB, 5183947AA, 68041485AC, 5183947AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Jeep Commander | Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Turn Signal Switch Part Number: 5143312AF
$160.59 MSRP: $243.00
You Save: $82.41 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Housing; Multi Purpose Switch; Headlamp Switch; Switch Multifunction
- Replaces: 5143312AE, 5143312AD, 5143312AC, 5143312AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Turn Signal Switch Part Number: 5143311AF
$160.59 MSRP: $243.00
You Save: $82.41 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Switch Housing.; Headlamp Switch
- Replaces: 5143311AE, 5143311AC, 5143311AB, 5143311AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Turn Signal Switch Part Number: 5183952AF
$44.94 MSRP: $66.60
You Save: $21.66 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Housing; Multi Purpose Switch; Multifunction Switch; Headlamp Switch; Switch Multifunction
- Replaces: 5183952AA, 5183952AC, 5183952AB, 5183952AD, 5183952AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Jeep Commander | Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

Jeep Commander Headlight Switch

Choose OEM Headlight Switch that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Headlight Switch follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Due to its indispensable nature the Jeep Commander Headlight Switch represents the reliability and performance traits which shoulder the Jeep brand. This Headlight Switch which is designed for multiple Commander models enables easy light beam control between high and low beams for safe vehicle operation in various driving situations. This component has both safety and operational benefits because it enables necessary illumination to help drivers see during low-light situations. This product stands out due to its durability since the Headlight Switch operates through demanding real-world conditions as a preferred option among Jeep fans. The seamless integration of the Headlight Switch benefits current Jeep Commander models from both the XK and 2022 versions so drivers can experience consistent operational performance. User experience receives an enhancement through the Headlight Switch which offers intelligent controls that enable swift control changes without interrupting driver focus. The attention to detail embodies Jeep's mission for safety and efficiency which positions the Commander as an exceptional vehicle in the automotive industry. The Jeep Commander Headlight Switch combines durability with critical functionality which makes it outperform expectations in line with the brand's standards of dependable performance. Commander owners cannot bear to drive without the the automaker model Headlight Switch which keeps their trips safe while illuminating the road clearly both on cities and paths.

Jeep Commander Headlight Switch Parts and Q&A

Turn Signal Switch
68041485AD
Q: How to Service the Headlight Switch on the Left Multifunction Control on Jeep Commander?
A:
Disconnect the battery negative wire, disable the SRS and allow the system's capacitor two minutes to safely discharge before proceeding with your service. The first step is to take off the upper and lower shrouds on the steering column. Following that, remove the wire harness connector from the multi-function switch found on the left. Take out the screw that holds the left multi-function switch to the bracket on the left of the Clock Spring. Slide the switch toward the case wall to remove the slide tabs at the ends of the switch housing from the channel formations in the bracket. Following this, separate the jumper wire harness connector from the left multi-function switch's inboard end and take out the switch from the Clock Spring.
Turn Signal Switch
68015101AG
Q: How to Install the Headlight Switch on the Left Multifunction Unit on Jeep Commander?
A:
Always disable the SRS by cutting and separating the negative Battery Cable and let the system capacitor empty for two minutes before continuing the installation. Put the left multi-function switch right next to the Clock Spring's mounting bracket in order to attach the connector on the jumper wire harness to the switch. L line up the tabs on the switch housing with the channels on the Clock Spring mounting bracket and push the switch until it's flush with the bracket. Loop the mounting tab on the front of the left multi-function switch over the mounting bracket on the Clock Spring and tighten it with the screw. Move the wire harness connector from the switch housing and plug it back into the instrument panel. After that, secure the lower and upper shrouds around the steering column and reattach the battery negative cable.