How to Remove the Seat Heater from the Cushion on Jeep Commander?

Before you can remove the heater pad, detach and isolate the battery negative cable. After that, lift off the preferred seat cushion in the same manner used for removing the cover. Remove the cables from the unworkable heated seat features. Lastly, pull the heating element away from the foam cushion following the adhesive lines so that you don't strip too much foam.

How to Install a Seat Heater Replacement on Jeep Commander?

Take the backing off the replacement heating element and apply it straight over the factory installed element. Do not fold or crease the element assembly as you move, as it may fail before its time. The next thing is to join the new heating element's electrical connectors. Next, reattach the negative battery cable and make sure your heated seat works correctly. Next up, fit the required seat cushion or seat back cover, routing the seat harness through the seat and seat back properly and tucking any extra wire neatly between the foam and the rear carpet section of the cover.

OEM Jeep Commander Seat Heater

Seat Warmer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Seat Heaters found

View related parts
Jeep Commander Seat Cushion Heater Part Number: 5183711AA
Product Specifications
- Other Name: Pad - Heater; Seat Heater Pad; Element; Pad Heater Cushion; Seat Heater
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Jeep Commander | Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Seat Cushion Heater, Front Part Number: 5000021AA
Product Specifications
- Other Name: Pad - Seat Cushion; Seat Heater Pad, Front, Front Lower, Lower; Element; Pad Heater Seatback, Pn 05000022Ab; Heated Pad Seat Cushion.
- Position: Front
- Replaces: 5000021AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Jeep Commander | 3.7L V6, 4.7L V8, 5.7L V8
- 2006 Jeep Commander
View related parts
Jeep Commander Seat Back Pad, Front Part Number: 5000022AB
Product Specifications
- Other Name: Pad - Seat Back; Seat Heater Pad, Front, Front Upper; Seat Back Heater; Heated Pad for back cushion.
- Position: Front
- Replaces: 5000022AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

Jeep Commander Seat Heater

Choose OEM Seat Heater that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Seat Heater follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Seat Heater is identified as one of the best products of Jeep Commander, highly appreciated for its durability and efficiency. Meant to give comfort through heat, the Seat Heater comes with a seat heater mat embedded in the car seat where the occupant will be seated, thus, making the driving experience a warm and cozy one especially during the cold climate season. This part is not just a luxury but has a rather crucial role in increasing effective driving results and decreasing the rate of traffic accidents that happen due to such factors as pain. Specifically made for different Jeep Commander models such as the Jeep Commander XK and the Jeep Commander 2022 Meridian, the Seat Heater is always present in the updates as a sign of Jeep's reliability and adherence to consumer needs. Regarding the Seat Heater's competitors in the automotive market, one could identify that it evenly distributes the heat towards the areas that come in contact with the seat to provide warmth. Also, the design of Jeep Commander as a utility vehicle with an extensive use of high strength steel, unibody construction and sophisticated suspension systems refine the features of Seat Heater making it a necessary component of the car. The Seat Heater already reveals the company's commitment to increase the car's comfort, practicality, and safety - the Jeep brand as a whole is already renowned for being one of the best options for SUV lovers.

Jeep Commander Seat Heater Parts and Q&A

Seat Back Pad, Front
5000022AB
Q: How to Remove the Seat Heater from the Cushion on Jeep Commander?
A:
Before you can remove the heater pad, detach and isolate the battery negative cable. After that, lift off the preferred Seat Cushion in the same manner used for removing the cover. Remove the cables from the unworkable heated seat features. Lastly, pull the heating element away from the foam cushion following the adhesive lines so that you don't strip too much foam.
Seat Cushion Heater
5183711AA
Q: How to Install a Seat Heater Replacement on Jeep Commander?
A:
Take the backing off the replacement heating element and apply it straight over the factory installed element. Do not fold or crease the element assembly as you move, as it may fail before its time. The next thing is to join the new heating element's electrical connectors. Next, reattach the negative Battery Cable and make sure your heated seat works correctly. Next up, fit the required Seat Cushion or seat back cover, routing the seat harness through the seat and seat back properly and tucking any extra wire neatly between the foam and the rear carpet section of the cover.