How to Remove a Harmonic Balancer on Jeep Commander?

The harmonic balancer or crankshaft pulley can be removed by first taking the negative cable off the battery. After that, pull out the radiator fan and remove the accessory drive belt. When the first four are finished, remove the harmonic balancer bolt. As the last step, you'll need to use the Crankshaft Insert 8513A and the Three Jaw Puller 1026 to take the balancer out.

How Is the Harmonic Balancer Installed on Jeep Commander?

Before installing the harmonic balancer, make sure the harmonic balancer bore and the center of the crankshaft are well cleaned to safeguard it from harm. Place the harmonic balancer's key in the harmonic balancer slot until it aligns with the key already in the crankshaft and then push it lightly onto the crankshaft. Attach Special Tool 8512-A by placing the washer below the hardened surface, securing the bearing on the threaded rod beneath the nut and finally attaching the nut to the threaded rod. Put Mopar(R) Nickel Anti-Seize or an alternative product on the threads of the threaded rod. Guide Special Tool 8512-A over the harmonic balancer and press it onto the crankshaft, then tighten the crankshaft harmonic balancer bolt to a torque of 175 Nm (130 ft. lbs.). After that, install the radiator fan, the accessory drive belt and secure the negative cable to the battery.

OEM Jeep Commander Harmonic Balancer

Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Harmonic Balancers found

View related parts
Jeep Commander Vibration Damper Part Number: 53022162AA
$504.17 MSRP: $739.00
You Save: $234.83 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Damper - Crankshaft; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Damper; Pulley; Damper Crankshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Jeep Commander | Limited, Sport | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Jeep Commander Vibration Damper Part Number: 4792815AB
Product Specifications
- Other Name: Damper - Crankshaft; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Damper; Pulley; Damper Crankshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Jeep Commander | Limited, Overland | 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Vibration Damper Part Number: 53022412AA
Product Specifications
- Other Name: Damper - Vibration; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Damper; Pulley; Damper Vibration
- Replaces: 53022084AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Jeep Commander | Limited, Overland, Sport | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Vibration Damper Part Number: 53020689AB
Product Specifications
- Other Name: Damper - Crankshaft; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Damper; Pulley; Damper Crankshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

Jeep Commander Harmonic Balancer

Choose OEM Harmonic Balancer that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Harmonic Balancer follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Jeep Commander Harmonic Balancer is one of the critical parts of Jeep Commander car that can improve performance and durability of the vehicle. Being a type of vibration absorber, the Harmonic Balancer plays the role of balancing the engine while at the same time dampening some of the vibrations during combustion. This way the efficiency and the robustness of the engine increases which are of paramount importance in the operations. The Jeep Commander comes in different types, the XK and 2022 and stands to gain from the widely enhanced and stronger and Harmonic Balancer that consists of a metal hub, an inertial ring, and an elastic rubber ring that opposes twisting forces. This design also protects the standard V6 and V8 engines but it accommodates the performance balancers for modified engines to get more protection for the increased vibrations and changes in RPM. One of the remarkable attributes of the Jeep Commander Harmonic Balancer in the automotive market is that it is put through safety tests especially at high RPM and some of the additional characteristics include 360 degree timing marks that enable the accurate tuning of the engine without necessarily having to stop the engine. It also can be used in different types of Commander models, which will also let Jeep lovers get the prime results in terms of performance. The incorporation of the Jeep Commander Harmonic Balancer means that the engine performance will be optimized together with safety hence its important place in the Jeep Commander engineering. In general, the Jeep Commander Harmonic Balancer is truly a standout definition of the high quality Jeep offers along with the performance, making the brand popular in the automotive market.

Jeep Commander Harmonic Balancer Parts and Q&A

Vibration Damper
53022162AA
Q: How to Remove a Harmonic Balancer on Jeep Commander?
A:
The harmonic balancer or crankshaft pulley can be removed by first taking the negative cable off the battery. After that, pull out the radiator fan and remove the accessory Drive Belt. When the first four are finished, remove the harmonic balancer bolt. As the last step, you'll need to use the Crankshaft Insert 8513A and the Three Jaw Puller 1026 to take the balancer out.
Vibration Damper
4792815AB
Q: How Is the Harmonic Balancer Installed on Jeep Commander?
A:
Before installing the harmonic balancer, make sure the harmonic balancer bore and the center of the Crankshaft are well cleaned to safeguard it from harm. Place the harmonic balancer's key in the harmonic balancer slot until it aligns with the key already in the crankshaft and then push it lightly onto the crankshaft. Attach Special Tool 8512-A by placing the washer below the hardened surface, securing the bearing on the threaded rod beneath the nut and finally attaching the nut to the threaded rod. Put Mopar(R) Nickel Anti-Seize or an alternative product on the threads of the threaded rod. Guide Special Tool 8512-A over the harmonic balancer and press it onto the crankshaft, then tighten the crankshaft harmonic balancer bolt to a torque of 175 Nm (130 ft. lbs.). After that, install the radiator fan, the accessory Drive Belt and secure the negative cable to the battery.