How to Service and Repair a Rear Parking Brake Cable for Rear on Jeep Commander?

When servicing and repairing the parking brake cable at the back, start by taking out the rear seat bottom and detaching the final drive control module's electrical plugs. After that, unscrew the nuts that hold the final drive plate control mechanism and remove the rear sill panels. Remove the carpet where it lies under the brake pedal to access the rear park brake cables, then lock them out. Take the brake cables off the equalizer and remove the park brake cables through the floor. After raising the car, take off the wheel and tire, the rear caliper and the disc brake rotor. Disconnect the cable from the brake actuator lever at the front and from each rear park brake shoe. Remove the bolts that clamp the stabilizer bar bushings and take out the two push pins holding the park brake cable to the axle. Then, unlock the park brake cable from the support plate and remove it from your ride.

How to Service and Repair a Parking Brake Cable for Front on Jeep Commander?

The first thing to do to service or fix the parking brake cable is to remove the negative battery cable. Then remove the driver's seat, left sill plate, left B-pillar trim panel, rear cover of the DVD player if shorts and the center console, if it is present. After that, lift up the rear seat to disconnect the electrical cables connected to the module. With a spanner, remove the mounting nuts on the bracket and at the rear sill plates. Pull on the carpet at the rear and roll it forward to find and lock the front park brake cable. Separate the front cable connector from the equalizer, take out the front routing clamps and loose the nuts and then replace the front cable at the brackets in the rear floor. Afterward, separate the front cable from opposite sides: the hand lever and the hand lever bracket.

OEM Jeep Commander Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Parking Brake Cables found

View related parts
Jeep Commander Rear Cable Part Number: 68065503AA
$149.36 MSRP: $225.00
You Save: $75.64 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable - Parking Brake; Brake Cable; Front Cable; Cable Parking Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Jeep Commander | Limited, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Front Cable Part Number: 5134701AB
$43.71 MSRP: $64.75
You Save: $21.04 (33%)
ADD TO CART
Product Specifications
- Other Name: Cable - Parking Brake; Brake Cable; Cable Parking Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2009 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Rear Cable Part Number: 68024891AB
$45.09 MSRP: $61.35
You Save: $16.26 (27%)
ADD TO CART
Product Specifications
- Other Name: Cable Package - Parking Brake; Brake Cable; Cable Package Parking Brake; Cable Parking Brake
- Replaces: 52124333AA, 68024891AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2009 Jeep Commander | Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Rear Cable Part Number: 68024890AC
$35.89 MSRP: $53.45
You Save: $17.56 (33%)
ADD TO CART
Product Specifications
- Other Name: Cable Package - Parking Brake; Brake Cable
- Replaces: 68024890AB, 68024890AA, 52124334AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Rear Cable Part Number: 52128118AH
Product Specifications
- Other Name: Cable - Parking Brake; Brake Cable
- Replaces: 52128118AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Jeep Commander | 65th Anniversary Edition, Base, Limited | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

Jeep Commander Parking Brake Cable

Choose OEM Parking Brake Cable that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Parking Brake Cable follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Parking Brake Cable is an important part which signify the reliability and features of the Jeep Commander series. This critical cable links the parking brake to the total braking system for the assurance of not moving off especially for the Jeep Commander along a slope. Jeep Commander models such as the XK and the 2022 Meridian all can benefit from the Parking Brake Cable, which can hold its own in daily use and adventure on the rough terrains. Its construction effectively improves operation and security and gives the driver confidence that his or her car is safe when parked. Thus, the Parking Brake Cable can be regarded as the premier branded parking brake cable in the automotive market today due to the value that it offers in terms of durability and need for brake cable maintenance for enhanced tension or even replacement as and when required. Jeep Commander owners need to have it checked or replaced if there are Parking Brake Cable problems because it can be dangerous for their vehicle. Furthermore, the design of Jeep Commander, which has the three-row seating at the interior and quite potent engines, fits well with the Parking Brake Cable as the product made by Jeep is reliable for family and off-roading enthusiasts. To sum up, it is possible to underline that Parking Brake Cable is one of the outstanding examples of this company's devotion to create safe and comfortable vehicles for people.

Jeep Commander Parking Brake Cable Parts and Q&A

Rear Cable
68024891AB
Q: How to Service and Repair a Rear Parking Brake Cable for Rear on Jeep Commander?
A:
When servicing and repairing the parking brake cable at the back, start by taking out the rear seat bottom and detaching the final drive control module's electrical plugs. After that, unscrew the nuts that hold the final drive plate control mechanism and remove the rear sill panels. Remove the carpet where it lies under the brake pedal to access the rear park brake cables, then lock them out. Take the brake cables off the equalizer and remove the park brake cables through the floor. After raising the car, take off the wheel and tire, the rear caliper and the disc brake rotor. Disconnect the cable from the brake actuator lever at the front and from each rear park brake shoe. Remove the bolts that clamp the stabilizer bar bushings and take out the two push pins holding the park brake cable to the axle. Then, unlock the park brake cable from the support plate and remove it from your ride.
Front Cable
5134701AB
Q: How to Service and Repair a Parking Brake Cable for Front on Jeep Commander?
A:
The first thing to do to service or fix the parking brake cable is to remove the negative Battery Cable. Then remove the driver's seat, left sill plate, left B-pillar trim panel, rear cover of the DVD player if shorts and the center console, if it is present. After that, lift up the rear seat to disconnect the electrical cables connected to the module. With a spanner, remove the mounting nuts on the bracket and at the rear sill plates. Pull on the carpet at the rear and roll it forward to find and lock the front park brake cable. Separate the front cable connector from the equalizer, take out the front routing clamps and loose the nuts and then replace the front cable at the brackets in the rear floor. Afterward, separate the front cable from opposite sides: the hand lever and the hand lever bracket.