Where is the Starter Relay located, and what steps should be taken to inspect and install it on Jeep Commander?

The power distribution centre contains the starter relay which is specified by a label on the cover of power distribution centre. Start by disconnecting and isolating the negative battery cable. Next, take off the cover on the Power Distribution Center and see the relay. Then, take out the starter relay from the PDC. Before installing the relay, verify the condition of the relay terminals and the terminals of the PDC connector for damage or corrosion and repair as required. In addition to the above, check the pin heights for all terminals in the PDC connector. Repair if necessary before installation.

OEM Jeep Commander Starter Relay

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Starter Relays found

View related parts
Jeep Commander Fuel Pump Relay Part Number: 4671168
$24.59 MSRP: $35.50
You Save: $10.91 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Relay - Mini, HVAC Blower, Accessory Power, A/C Clutch, Fog Light, Headlight, Starter, Horn, Multi Purpose; Fan Relay; Auto Shutdown Relay; Solenoid Relay; Starter Relay; Horn Relay; Mini Relay.
- Replaces: 4606409AA, 4608650AB, 4606418AA, 56006846
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Fuel Pump Relay, Rear Part Number: 4727370AA
$27.84 MSRP: $40.00
You Save: $12.16 (31%)
Product Specifications
- Other Name: Relay - Mini; PCM Relay; Fan Relay; Accessory Relay(F/R); A/C Clutch; Starter; Fog Light; Fan Relay; Blower Motor Relay; Oxygen Sensor Relay; Mini 5 Terminal Square Relay.
- Position: Rear
- Replaces: 56006707, 56006709, 4848879AB, 4638094, 68369406AA, 68223712AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

Jeep Commander Starter Relay

Choose OEM Starter Relay that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Starter Relay follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Jeep Commander Starter Relay sends power from the battery to the starter solenoid, which cranks the engine when the key is turned to start. The relay receives a low-current command from the ignition switch or Powertrain Control Module and then switches to its on position. The Starter Relay stays in its on position while the key is in the start position. An electromechanical Starter Relay controls high current in the Jeep Commander starting circuit only when necessary. This prevents unwanted load on the wiring. When the Starter Relay becomes stuck in the on position, the starter remains meshed with the flywheel. This damages the transmission or other parts of the starting system. Alternatively, if the Starter Relay remains stuck off, the engine won't crank at all. In other words, no-start situation. Every Jeep Commander utilizes fast switching of this compact unit to coordinate battery energy with the starter assembly. As a reliable component, Starter Relay protects the drivetrain of Jeep Commander by limiting the engagement time and allowing proper cranking of the engine.

Jeep Commander Starter Relay Parts and Q&A

Fuel Pump Relay
4671168
Q: Where is the Starter Relay located, and what steps should be taken to inspect and install it on Jeep Commander?
A:
The power distribution centre contains the starter relay which is specified by a label on the cover of power distribution centre. Start by disconnecting and isolating the negative battery cable. Next, take off the cover on the Power Distribution Center and see the relay. Then, take out the starter relay from the PDC. Before installing the relay, verify the condition of the relay terminals and the terminals of the PDC connector for damage or corrosion and repair as required. In addition to the above, check the pin heights for all terminals in the PDC connector. Repair if necessary before installation.