How to Remove a Timing Cover on Jeep Commander?

First, remove the negative battery cable and drain your cooling system before taking out the engine timing cover. After that, take out the electric cooling fan as well as the fan shroud assembly, then remove the radiator fan. Loose the heater hoses at the timing cover and the lower radiator hose at the engine. Disconnect the accessory drive belt tensioner assembly (1) and take out the crankshaft damper after that. After that, get rid of the generator and the A/C compressor. Don't forget that the 3.7L engine's front cover is sealed together with the engine block with an anaerobic sealer, so you only need to use Mopar(R) Grey Engine RTV material for service. Water pump removal is not necessary when you need to replace the timing cover. At the end, loosen and remove the bolts between the timing cover and the engine block and then pull off the timing cover.

How to Install a Timing Cover on a 3.7L Engine on Jeep Commander?

When you install the timing cover, first rub the surface with alcohol and avoid cleaning using oil or any scratchy tools. Due to the factory using anaerobic sealer instead of a gasket, replace it with Mopar(R) Engine RTV on the 3.7L engine. Check the water passage o-rings carefully and if any damage is seen, swap out new ones. Rub a 3 to 4 mm thick bead of Mopar(R) Engine RTV sealer on the inside of the front cover, press the cover on and tighten the fasteners in order to 58 Nm (43 ft. lbs.). Following this, set in the crankshaft damper, A/C compressor, generator and accessory drive belt tensioner. After that, connect the radiator's upper and lower hoses, both heater hoses and put the radiator fan in place. The last step is adding coolant and hooking the battery's negative cable.

OEM Jeep Commander Timing Cover

Engine Timing Cover

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Timing Covers found

View related parts
Jeep Commander Timing Cover Part Number: 68416971AB
$349.23 MSRP: $515.00
You Save: $165.77 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover - Timing Case; Engine Timing Cover; Front Cover; Cover Timing Case
- Replaces: 68416971AA, 53022096AI, 4893864AA, 53022096AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Jeep Commander | Limited, Overland, Sport | 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Timing Cover Part Number: 4792795AD
Product Specifications
- Other Name: Cover - Timing Case; Engine Timing Cover; Front Cover; Cover Timing Case
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Jeep Commander | Limited, Overland | 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Timing Cover Part Number: 5134142AF
Product Specifications
- Other Name: Cover - Timing; Engine Timing Cover; Front Cover; Cover Kit Timing
- Replaces: 5134142AD, 5134142AG, 5134142AE, 5134142AB, 5134142AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2009 Jeep Commander | 65th Anniversary Edition, Base, Limited, Sport | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Jeep Commander Timing Cover Part Number: 53021238AB
Product Specifications
- Other Name: Cover - Chain Case; Engine Timing Cover; Front Cover; Cover Chain Case Includes Items 2, 3, 4, 5, 8, 11; See Notes.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS

Jeep Commander Timing Cover

Choose OEM Timing Cover that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Timing Cover follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Jeep Commander Timing Cover is one of the significant parts that afford with intense shield to the engines timing system that incorporates the timing belt, timing chain, or cam belt. Often used for racing cars, the Timing Cover is made of high end material such as aluminum, plastic and steel through which it can cover other essential parts of the engine that can be easily damaged, the Timing Cover is known to be very reliable and performant. This protective function useful for the preservation of the engine and, thereby increasing the that and safety of the Jeep Commander. Suitable with the Commander XK as well as the 2022 Meridian, the Timing Cover is tailored for each version with appropriate performance. Some of the Jeep Commander Timing Covers ordered by consumers already feature added gaskets that make them unique in the automotive industry. However, these covers are traditionally very durable, and it is critical to observe the Timing Cover for signs of wear or failure because if it fails, it is crucial to replace it without delay for the vehicle's safe operation. Thus, the Jeep Commander that offers three-row seating and strong powerplant choices gains a lot from a reliable Timing Cover. In conclusion, Jeep Commander Timing Cover is not only a shield but is also an active participant in the functioning of the Jeep Commander, and that makes it such an important part of the Jeep Commander's design.

Jeep Commander Timing Cover Parts and Q&A

Timing Cover
68416971AB
Q: How to Remove a Timing Cover on Jeep Commander?
A:
First, remove the negative Battery Cable and drain your cooling system before taking out the engine timing cover. After that, take out the electric cooling fan as well as the fan shroud assembly, then remove the radiator fan. Loose the heater hoses at the timing cover and the lower radiator hose at the engine. Disconnect the accessory drive Belt Tensioner assembly (1) and take out the crankshaft damper after that. After that, get rid of the generator and the A/C compressor. Don't forget that the 3.7L engine's front cover is sealed together with the engine block with an anaerobic sealer, so you only need to use Mopar(R) Grey Engine RTV material for service. Water Pump removal is not necessary when you need to replace the timing cover. At the end, loosen and remove the bolts between the timing cover and the engine block and then pull off the timing cover.
Timing Cover
5134142AF
Q: How to Install a Timing Cover on a 3.7L Engine on Jeep Commander?
A:
When you install the timing cover, first rub the surface with alcohol and avoid cleaning using oil or any scratchy tools. Due to the factory using anaerobic sealer instead of a gasket, replace it with Mopar(R) Engine RTV on the 3.7L engine. Check the water passage o-rings carefully and if any damage is seen, swap out new ones. Rub a 3 to 4 mm thick bead of Mopar(R) Engine RTV sealer on the inside of the front cover, press the cover on and tighten the fasteners in order to 58 Nm (43 ft. lbs.). Following this, set in the crankshaft damper, A/C compressor, generator and accessory drive Belt Tensioner. After that, connect the radiator's upper and lower hoses, both heater hoses and put the radiator fan in place. The last step is adding coolant and hooking the battery's negative cable.