How to Service and Repair a Trunk Lid Latch on Jeep Commander?

You should begin by disconnecting the battery negative cable to service and repair the trunk/liftgate latch. Take out the trim panel covering the liftgate and place the watershield on the side to reach the back of the latchway. Take out the electrical connectors from the latch, then remove the cable from the liftgate handle and remove the support clips. Pull out the three screws from the latch on the liftgate and take the latch from your vehicle. For the installation, fit the latch through the opening in the liftgate from the inside, insert and firmly tighten the three bolts so they are fastened to the studs. Join the latch release cable to the handle and put the support clips in place, before fastening the electrical cables to the latch. Put the watershield back, slide in the trim panel and end by hooking up the battery negative cable once again.

How to Install a Trunk Lid Latch for a Power Liftgate on Jeep Commander?

Set the latch into its spot on the liftgate as the first step of assembly. Screw the latch onto the liftgate, keeping the torque between 17 Nm and 150 in. lbs. Attach the wire connectors to the liftgate latch and place the end of the outside handle into the clip holder on the latch. Ensure the liftgate is fitting and working properly and then fix any issues before you install the liftgate lower trim panel.

OEM Jeep Commander Trunk Lid Latch

Luggage Compartment Door Lock Assembly

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Trunk Lid Latches found

View related parts
Jeep Commander Lock Actuator, Rear Part Number: 4589131AG
$151.61 MSRP: $227.00
You Save: $75.39 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch - Liftgate; Rear Trunk Lock Actuator Motor; Door Lock Actuator; Trunk Latch.; Lock; Latch; Latch Lift Gate
- Position: Rear
- Replaces: 4589131AF, 4589131AA, 4589131AB, 4589131AC, 4589131AD, 4589131AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Lock, Rear Part Number: 4589131AA
$151.61 MSRP: $227.00
You Save: $75.39 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch - Liftgate; Liftgate Latch, Rear; Door Lock Actuator Motor; Door Lock Actuator; Trunk Latch; Door Lock; Latch; Latch Lift Gate
- Position: Rear
- Replaced by: 4589131AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Lock, Rear Part Number: 55396445AA
$285.22 MSRP: $418.00
You Save: $132.78 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch - Liftgate Glass; Liftgate Glass Latch, Rear; Door Lock Actuator Motor; Door Lock Actuator; Door Lock; Latch; Latch Lift Gate Glass
- Position: Rear
- Replaces: 55396445AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Lock Actuator, Rear Part Number: 4589581AL
$393.88 MSRP: $575.00
You Save: $181.12 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch - Liftgate; Rear Trunk Lock Actuator Motor; Door Lock Actuator; Trunk Latch.; Lock; Latch; Latch Lift Gate
- Position: Rear
- Replaces: 4589581AF, 4589581AI, 4589581AC, 4589581AB, 4589581AE, 4589581AG, 4589581AJ, 4589581AK, 4589581AD, 4589581AH, 4589581AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Jeep Commander | Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

Jeep Commander Trunk Lid Latch

Choose OEM Trunk Lid Latch that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Trunk Lid Latch follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

It relates to the trunk lid locking system of Jeep Commander; more specifically to the latching mechanism that is equally paramount to the brand's reliability and performance. Meant to lock the trunk lid properly, this Trunk Lid Latch is responsible for effectively locking the Commander's trunk area during travel so as to protect the items inside from theft and detoriation by factors such as heat, cold etc. Made to be sturdy, the Trunk Lid Latch is developed in stainless steel to protect the trunk from opening when it is not supposed to and to stop cases of lost cargo. Its function is somewhat similar to that of a seat belt, where one is required to release the lock in order to activate it; this translates to increased efficiency and the provision of safety to Jeep Commander consumers. The compatibility also stands out as an essential aspect because Trunk Lid Latch is intended for different Commander models under which the Jeep XK and the 2022 Meridian version are recognized, making it possible to establish the reliable design for all the Jeep fans. It is then expected that proper maintenance should be observed in the Trunk Lid Latch functionality since its efficiency declines with time due to constant use. Apart from deterring theft, this component assures the general security of the Jeep Commander in a very stylish manner. As is apparent from the description, the Jeep Commander Trunk Lid Latch remains a star auto part within the market thanks for its dependable function and robust design, which secures clients and makes their ride far more enjoyable. Thus, the Jeep Commander Trunk Lid Latch is truly a must-have for those who need a rigid and strong solution to their trunk.

Jeep Commander Trunk Lid Latch Parts and Q&A

Lock, Rear
55396445AA
Q: How to Service and Repair a Trunk Lid Latch on Jeep Commander?
A:
You should begin by disconnecting the battery negative cable to service and repair the trunk/liftgate latch. Take out the trim panel covering the liftgate and place the watershield on the side to reach the back of the latchway. Take out the electrical connectors from the latch, then remove the cable from the liftgate handle and remove the support clips. Pull out the three screws from the latch on the liftgate and take the latch from your vehicle. For the installation, fit the latch through the opening in the liftgate from the inside, insert and firmly tighten the three bolts so they are fastened to the studs. Join the latch release cable to the handle and put the support clips in place, before fastening the electrical cables to the latch. Put the watershield back, slide in the trim panel and end by hooking up the battery negative cable once again.
Lock, Rear
4589131AA
Q: How to Install a Trunk Lid Latch for a Power Liftgate on Jeep Commander?
A:
Set the latch into its spot on the liftgate as the first step of assembly. Screw the latch onto the liftgate, keeping the torque between 17 Nm and 150 in. lbs. Attach the wire connectors to the liftgate latch and place the end of the outside handle into the clip holder on the latch. Ensure the liftgate is fitting and working properly and then fix any issues before you install the liftgate lower trim panel.