Other Name: Control - Vehicle Feature Controls; HVAC Temperature Control Panel; Climate Control Module; Blower Control Switch; Center Stack Vehicle Feature Controls
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
Fits the following Vehicles:
2019-2021 Jeep Compass | 80th Anniversary, Altitude, High Altitude, Latitude, Limited, Sport, Trailhawk, Upland | 4 Cyl 2.4 L GAS
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
Fits the following Vehicles:
2007-2010 Jeep Compass | Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
| Page 1 of 2 |Next >
1-20 of 24 Results
Jeep Compass A/C Switch
Choose OEM A/C Switch that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each A/C Switch follows strict manufacturing steps to lock in quality and fit. If your Jeep Compass matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Compass parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.
Q: How to Install the A/C Switch for Temperature Control on Jeep Compass?
A:
Substitute the A/C-heater control (8) into the instrument panel center bezel (7) and fasten with four screws (6) torquing them to 2 Nm (17 in. lbs.) Then, the center bezel is attached to the instrument panel and the wire harness connectors (3 and 4) are connected to the back of the A/C-heater control. This is done by first installing the mode control cable onto the A/C heater control and then the temperature control cable. Return the control cables (1 and 9) to the mode door control sector gear (2) and temperature control sector gear (5) seating them fully into the sector gears with the retaining clips. Then in turn, connect the control cables to the back of the A/C heater control ensuring that the retaining clips are fully engaged there. Next, install the dol hardware and the center bezel, reconnect the wire harness connectors to the accessory switches, Power Window Switches and clock (as equipped) and reconnect the negative Battery Cable.
Q: How to Maintain the A/C Switch for Optimal Performance on Jeep Compass?
A:
You should begin the A/C heater control service by removing and isolating the negative Battery Cable to disable the air bag and waiting for the two minutes it takes for the air bag capacitor to lose its charge. First, separate the center bezel from the instrument panel and take out the wiring connector for the clock, Power Window Switches and accessory switches. While removing the parts, mark the places where you found each control cable. Take a small screwdriver and remove the clips that on either end of the control cables. In addition, remove the clips that hold the control cables to the gear in the mode control and temperature control sectors. Detach the wire harness connections from the A/C-heater control button at the back and set the center bezel on a workbench. In the end, remove the four screws connecting the A/C-heater control to the back of the center bezel and take out the control.