How to Service and Repair a Control Arm Bushing on Jeep Wrangler?

You should take out the upper suspension arm before you service and repair the control arm bushing. On a 4x2 vehicle, locate Spacer 7932-3 above the axle bushing and do so as well on the right side of a 4x4 vehicle. After that, put Receiver 7932-1 around the flanged part of the bushing and hold Remover/Install 7932-2 against the open end of the bushing. Bolt 7604 to the receiver, remover and threaded hole with Washer 7607. Next, secure Long Nut 7603 and turn it to push on the bearing and lever out of the axle. Once you have removed the nut, bolt, receiver, remover and bushing, keep Spacer 7932-3 there while installing a new bushing on a 4x2 or on the right side of a 4x4 vehicle. Set Receiver 7932-1 on the bracket side opposite from the axle and put the new bushing next to the axle bracket, making sure the long end of Remover/Install 7932-2 rests against it. Slot the receiver, bushing and installer around bolt 7604 and work the Long Nut 7603 over the receiver until the bushing is fully drawn inside the bracket. After that, take the tools out and restore the upper suspension arm.

How to Properly Service a Control Arm Bushing and What Steps Are Involved for a Jeep Cherokee?

First thing to do is remove the upper suspension arm from the axle to work on and repair the control arm bushing. If you have a 4x2, insert Spacer 7932-3 above the axle bushing and for the right side of a 4x4, follow the same steps. Slide the flanged end of Receiver 7932-1 over the bushing and press the small side of Remover/Install 7932-2 against the other section of the bushing. Put Bolt 7604 through the remover, bushing and receiver, add Long Nut 7603 and tighten the nut to bring the bushing out of the bracket. Spacer 7932-3 goes in before the bushing on a 4x2 vehicle or the right side of a 4x4 vehicle after you have taken out the nut, bolt, receiver, remover and bushing. To install, place Receiver 7932-1 on the side away from the axle bracket, fit the new bushing into the bracket with the large end of Remover/Install 7932-2 placing it against the bushing and strike the Remover/Install hard with a hammer until the axle bracket will not move anymore. Push Bolt 7604 through the receiver, bushing and installer and then join Long Nut 7603 and tighten it to pull the bushing inside the axle bracket. Take out the tools and install the upper suspension arm last.

OEM Jeep Control Arm Bushing

Suspension Arm Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

20 Control Arm Bushings found

View related parts
Jeep Lower Control Arm Bushing, Rear Part Number: 52129094AA
$38.03 MSRP: $81.95
You Save: $43.92 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Control Arm; Suspension Control Arm Bushing, Rear Lower; Axle Beam Mount; Bushings; Bushing Control Arm; Control Arm Bushing
- Position: Rear Lower
Fits the following Jeep Models:
- Liberty | 2005-2007 | 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
Jeep Upper Control Arm Bushing, Front Part Number: 52125369AA
$49.33 MSRP: $73.35
You Save: $24.02 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Control Arm; Suspension Control Arm Bushing, Front Upper; Axle Pivot Bushing; Axle Beam Mount; Bushings; Bushing Control Arm; Control Arm Bushing
- Position: Front Upper
Fits the following Jeep Models:
- Liberty | 2008-2012 | Jet, Limited, Renegade, Sport | 6 Cyl 3.7 L GAS
View related parts
Jeep Upper Control Arm Bushing Part Number: 52087852
$27.84 MSRP: $40.00
You Save: $12.16 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Control Arm; Control Arm Bushing; Axle Pivot Bushing; Axle Beam Mount; Upper Control Arm Upper Bushing; Bushing Control Arm
Fits the following Jeep Models:
- Cherokee | 1985-2001 | Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE, Sport | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
- Comanche | 1986-1992 | Base, Chief, Custom, Eliminator, Laredo, Pioneer, X, XLS | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
- Grand Cherokee | 1993 | Base, Laredo, Limited | 6 Cyl 4.0 L GAS, 8 Cyl 5.2 L GAS
- Grand Wagoneer | 1993 | Base | 8 Cyl 5.2 L GAS
- Wagoneer | 1985-1990 | Base, Limited | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
- Wrangler | 1998-2005 | Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View More
View related parts
Jeep Lower Control Arm Bushing, Front Part Number: 4670457AA
$63.05 MSRP: $94.50
You Save: $31.45 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Control Arm; Front Lower Suspension Control Arm Bushing Kit; Axle Pivot Bushing; Bushings; Bushing Control Arm; Suspension Control Arm Bushing; Control Arm Bushing
- Position: Front Lower
- Replaces: 52088649AD, 52088649AC
Fits the following Jeep Models:
- Liberty | 2002-2012 | 65th Anniversary Edition, Jet, Limited, Renegade, Rocky Mountain Edition, Sport | 2.4L L4, 2.8L L4, 3.7L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
Jeep Lower Control Arm Bushing Part Number: 52088433
$29.91 MSRP: $38.51
You Save: $8.60 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Control Arm; Suspension Control Arm Bushing Kit; Control Arm Bush Kit; Control Arm Bushing; Axle Pivot Bushing; Bushing Control Arm L; Bushing Control Arm
Fits the following Jeep Models:
- Wrangler | 1997-2006 | 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
Jeep Bushing, Front Part Number: 52088220
$26.07 MSRP: $56.15
You Save: $30.08 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Control Arm; Axle Support Bushing, Front; Bushing Control Arm
- Position: Front
Fits the following Jeep Models:
- Grand Cherokee | 1999 | Laredo, Limited | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Jeep Bushing, Front Part Number: 52088214
$75.85 MSRP: $115.00
You Save: $39.15 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Control Arm; Axle Support Bushing, Front; Bushing Control Arm
- Position: Front
Fits the following Jeep Models:
- Grand Cherokee | 2000-2004 | Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Jeep Axle Beam Mount Bushing, Front Part Number: 52060138AA
$53.72 MSRP: $79.95
You Save: $26.23 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Control Arm; Front Axle Support; Suspension Control Arm; Sway Bar Bushing; Bushing; Bushing Control Arm
- Position: Front
Fits the following Jeep Models:
- Wrangler | 2007-2011 | 70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X | 6 Cyl 3.8 L GAS
View related parts
Jeep Lower Control Arm Bushing Part Number: 52089633AA
$2.39 MSRP: $3.03
You Save: $0.64 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Control Arm; Suspension Control Arm Bushing; Control Arm Bushing; Axle Beam Mount
Fits the following Jeep Models:
- Liberty | 2004 | Limited, Renegade, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.7 L GAS
View related parts
Jeep Lower Control Arm Bushing Part Number: 52087720AB
$24.54 MSRP: $52.00
You Save: $27.46 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Control Arm; Suspension Control Arm Bushing Kit; Axle Pivot Bushing; Axle Beam Mount; Bushings
Fits the following Jeep Models:
- Cherokee | 1985-1999 | Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE, Sport | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
- Comanche | 1986-1992 | Base, Chief, Custom, Eliminator, Laredo, Pioneer, X, XLS | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
- Grand Cherokee | 1993-1998 | 5.9 Limited, Base, Laredo, Limited, Orvis, SE, TSi | 6 Cyl 4.0 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
- Grand Wagoneer | 1993 | Base | 8 Cyl 5.2 L GAS
- Wagoneer | 1985-1990 | Base, Limited | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
View More
View related parts
Jeep Upper Control Arm Bushing Part Number: 52087709
$35.04 MSRP: $44.43
You Save: $9.39 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Control Arm; Suspension Control Arm Bushing Kit; Axle Pivot Bushing; Axle Beam Mount; Upper Control Arm Upper Bushing for 5.2L Engine.
Fits the following Jeep Models:
- Grand Cherokee | 1993-1998 | 5.9 Limited, Base, Laredo, Limited, Orvis, SE, TSi | 6 Cyl 4.0 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
- Grand Wagoneer | 1993 | Base | 8 Cyl 5.2 L GAS
- Wrangler | 2006, 1997 | 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View More
View related parts
Jeep Upper Control Arm Bushing, Front Part Number: 52088634AB
$26.51 MSRP: $38.95
You Save: $12.44 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Control Arm; Front Upper Suspension Control Arm Bushing Kit; Axle Pivot Bushing; Axle Beam Mount; Bushings; Bushing Control Arm; Suspension Control Arm Bushing; Control Arm Bushing
- Position: Front Upper
Fits the following Jeep Models:
- Liberty | 2002-2007 | 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
Jeep Lower Control Arm Bushing, Rear Part Number: 52088648AA
$38.93 MSRP: $57.95
You Save: $19.02 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Control Arm; Suspension Control Arm Bushing, Rear Lower; Axle Beam Mount; Bushings; Bushing Control Arm; Suspension Control Arm Bushing; Control Arm Bushing
- Position: Rear Lower
Fits the following Jeep Models:
- Liberty | 2002-2004 | Limited, Renegade, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.7 L GAS
View related parts
Jeep Lower Control Arm Bushing Part Number: 52088167
$15.35 MSRP: $19.75
You Save: $4.40 (23%)
ADD TO CART
Product Specifications
- Other Name: Bushing - Control Arm; Suspension Control Arm Bushing; Control Arm Bushing; Axle Pivot Bushing; Bushing Control Arm
Fits the following Jeep Models:
- Grand Cherokee | 1993-1998 | 5.9 Limited, Base, Laredo, Limited, Orvis, SE, TSi | 6 Cyl 4.0 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
- Grand Wagoneer | 1993 | Base | 8 Cyl 5.2 L GAS
View related parts
Jeep Lower Control Arm Bushing, Rear Part Number: 52089065AA
$41.91 MSRP: $62.35
You Save: $20.44 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Control Arm; Suspension Control Arm Bushing, Rear Lower; Axle Beam Mount; Bushing Control Arm; Suspension Control Arm Bushing; Control Arm Bushing
- Position: Rear Lower
Fits the following Jeep Models:
- Liberty | 2002-2003 | Limited, Renegade, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.7 L GAS
View related parts
Jeep Lower Control Arm Bushing Part Number: 52088746AA
$25.20 MSRP: $37.30
You Save: $12.10 (33%)
ADD TO CART
Product Specifications
- Other Name: Bushing - Pivot; Suspension Control Arm Bushing; Control Arm Bushing; Axle Pivot Bushing; Bushings; Bushing Pivot
Fits the following Jeep Models:
- Liberty | 2002-2007 | 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
Jeep Bushing, Front Upper Outer Part Number: 68332999AB
$12.83 MSRP: $18.95
You Save: $6.12 (33%)
ADD TO CART
Product Specifications
- Other Name: Bushing - Control Arm; Suspension Control Arm Bushing, Front Upper Outer; Axle Pivot Bushing; Bushings; Bushing Control Arm; Control Arm Bushing
- Position: Front Upper Outer
- Replaces: 68332999AA, 68388731AA
Fits the following Jeep Models:
- Gladiator | 2020-2025 | 80th Anniversary, Altitude, Freedom, High Altitude, High Tide, Jeep Beach, Launch Edition, Mojave, Mojave X, NightHawk, Overland, Rubicon, Rubicon X, Sport, Sport S, Texas Trail, Willys, Willys Sport | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L GAS
- Wrangler | 2018-2025 | 80th Anniversary, Freedom, Islander, Rubicon, Rubicon X, Sport, Sport S, Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited High Altitude 4xe, Unlimited High Tide, Unlimited Islander, Unlimited Moab, Unlimited Rubicon, Unlimited Rubicon 392, Unlimited Rubicon 4xe, Unlimited Rubicon X, Unlimited Rubicon X 4xe, Unlimited Sahara, Unlimited Sahara 4xe, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Sport S 4xe, Unlimited Willys, Unlimited Willys 4xe, Unlimited Willys Sport, Willys, Willys Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.4 L GAS
View related parts
Jeep Upper Control Arm Bushing, Rear Part Number: 52088425
Product Specifications
- Other Name: Bushing - Control Arm; Suspension Control Arm Bushing, Rear Upper; Axle Beam Mount; Bushings; Bushing Control Arm; Suspension Control Arm Bushing; Control Arm Bushing
- Position: Rear Upper
Fits the following Jeep Models:
- Liberty | 2002-2007 | 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
Jeep Lower Control Arm Bushing Part Number: 52038026
Product Specifications
- Other Name: Bushing - Control Arm; Suspension Control Arm Bushing; Control Arm Bushing; Axle Beam Mount; Bushings; Bushing, Control Arm Lower, Rear; Bushing, Control Arm Lower; Bushing, Control Arm Rear; Bushing Control Arm
Fits the following Jeep Models:
- Grand Cherokee | 1993-1998 | 5.9 Limited, Base, Laredo, Limited, Orvis, SE, TSi | 6 Cyl 4.0 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
- Grand Wagoneer | 1993 | Base | 8 Cyl 5.2 L GAS
View related parts
Jeep Lower Control Arm Bushing, Rear Part Number: 52128864AA
Product Specifications
- Other Name: Bushing - Control Arm; Suspension Control Arm Bushing, Rear Lower; Axle Beam Mount; Bushings; Bushing Control Arm; Control Arm Bushing
- Position: Rear Lower
Fits the following Jeep Models:
- Liberty | 2004-2007 | 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS

Jeep Control Arm Bushing

OEM parts sourced directly from Jeep deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Jeep Control Arm Bushing for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

Jeep Control Arm Bushing isolates wheel connection, cuts vibration, and maintains steering astute on ruddy terrain. Jeep has been a symbol of go-anywhere grit, open-air fun, and machines that shake off punishment, whether it is rock, sand, snow, or endless washboard roads since 1945. Jeep builds on that heritage now with Selec-Terrain and stout driveshafts, a twist-and-go dial that allows drivers to change traction modes without halting the adventure. The interior shows Jeep stuffing cabins with crystal-clear digital gauges, voice recognition, head-up navigation, and wireless updates to ensure trail veterans and novices remain connected as they pursue far-off horizons and playlists. It is a culture where community issues, and Jeep proprietors exchange tips, trails, parts, and anecdotes, an attitude where real mud is more important than showroom banter on a weekend. Drivers are always confident, and gimmicks are never high, whether it is hauling kayaks into the coast or crawling slick rock at dawn. Control Arm Bushing is applied between the suspension arm and frame to absorb road shock, which is more or less of a pivot because it allows the wheels to rise, fall, and turn without scraping or drifting. Control Arm Bushing is also applied to control side-to-side scrubbing, keeping tires on point when ruts tug at the chassis. Constructed of rubber, polyurethane, or hi-tech elastomer, all Control Arm Bushing materials vary in ride feel, life, and allow their owners to adjust comfort against abuse. Replacing one Control Arm Bushing with a new one is enough to recover sharp turn-in, less noisy cabins, and extended life on all other joints in the suspension.

Jeep Control Arm Bushing Parts and Q&A

Lower Control Arm Bushing
52088433
Q: How to Service and Repair a Control Arm Bushing on Jeep Wrangler?
A:
You should take out the upper suspension arm before you service and repair the control arm bushing. On a 4x2 vehicle, locate Spacer 7932-3 above the axle bushing and do so as well on the right side of a 4x4 vehicle. After that, put Receiver 7932-1 around the flanged part of the bushing and hold Remover/Install 7932-2 against the open end of the bushing. Bolt 7604 to the receiver, remover and threaded hole with Washer 7607. Next, secure Long Nut 7603 and turn it to push on the bearing and lever out of the axle. Once you have removed the nut, bolt, receiver, remover and bushing, keep Spacer 7932-3 there while installing a new bushing on a 4x2 or on the right side of a 4x4 vehicle. Set Receiver 7932-1 on the bracket side opposite from the axle and put the new bushing next to the axle bracket, making sure the long end of Remover/Install 7932-2 rests against it. Slot the receiver, bushing and installer around bolt 7604 and work the Long Nut 7603 over the receiver until the bushing is fully drawn inside the bracket. After that, take the tools out and restore the upper suspension arm.
Upper Control Arm Bushing
52087852
Q: How to Properly Service a Control Arm Bushing and What Steps Are Involved for a Jeep Cherokee?
A:
First thing to do is remove the upper suspension arm from the axle to work on and repair the control arm bushing. If you have a 4x2, insert Spacer 7932-3 above the axle bushing and for the right side of a 4x4, follow the same steps. Slide the flanged end of Receiver 7932-1 over the bushing and press the small side of Remover/Install 7932-2 against the other section of the bushing. Put Bolt 7604 through the remover, bushing and receiver, add Long Nut 7603 and tighten the nut to bring the bushing out of the bracket. Spacer 7932-3 goes in before the bushing on a 4x2 vehicle or the right side of a 4x4 vehicle after you have taken out the nut, bolt, receiver, remover and bushing. To install, place Receiver 7932-1 on the side away from the axle bracket, fit the new bushing into the bracket with the large end of Remover/Install 7932-2 placing it against the bushing and strike the Remover/Install hard with a hammer until the axle bracket will not move anymore. Push Bolt 7604 through the receiver, bushing and installer and then join Long Nut 7603 and tighten it to pull the bushing inside the axle bracket. Take out the tools and install the upper suspension arm last.