How to Remove and Replace the Drive Belt on a 3.7L Engine on Jeep Liberty?

The accessory drive belt on a 3.7L engine should be replaced only after checking the pulley condition. Make sure that the new belt is properly placed to avoid the engine from getting too hot because of wrong water pump rotation. After installing the belt around all pulleys-except the idler pulley-spin the tensioner arm to its limit point. Tuck the belt around the idler pulley before letting the tensioner turn into the belt so it sits on every pulley. After putting on the belt, examine the peg wear point; the distance allowed between these parts should be no more than 24 mm (0.94 inches). After that, put in the combination washer reservoir/coolant recovery container that has part number 123456.

How to Install the Drive Belt for Power Steering on Jeep Liberty?

Firmly set the power steering belt around the crankshaft pulley and make sure it is in the correct place in the grooves. Later, adjust the top of the power steering belt onto the top of the power steering pulley. It's important to use wire that has nylon locks instead of those with metal. With the power steering pulley turned over, slide a nylon wire tie, 7.75X1/8x.0.050 in., into one hole on the back of the pulley and tighten it to attach the drive belt. With the drive belt in your hand, rotate the engine slowly and clockwise. Once the belt is in place, turn the engine until you hear the wire tie break and take it off the vehicle.

OEM Jeep Liberty Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Drive Belts found

View related parts
Jeep Liberty Serpentine Belt Part Number: 5072437AC
$37.13 MSRP: $55.00
You Save: $17.87 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Accessory Drive; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Belt Accessory Drive
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Jeep Liberty | Limited, Sport | 4 Cyl 2.8 L DIESEL
View related parts
Jeep Liberty Serpentine Belt Part Number: 5135746AA
$54.45 MSRP: $80.70
You Save: $26.25 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive; Belt Serpentine
- Replaces: 53032125AD, 53032380AE, 53032380AC, 53032380AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010-2012 Jeep Liberty | Jet, Limited, Renegade, Sport | 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Serpentine Belt Part Number: 53013905AC
$37.97 MSRP: $56.25
You Save: $18.28 (33%)
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive; Belt Serpentine
- Replaces: 53013905AD, 53013905AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Jeep Liberty | Limited, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Serpentine Belt Part Number: 53032037AJ
$13.80 MSRP: $19.85
You Save: $6.05 (31%)
ADD TO CART
Product Specifications
- Other Name: Belt - Accessory Drive; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Jeep Liberty | Limited, Renegade, Rocky Mountain Edition, Sport | 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Serpentine Belt Part Number: 53013905AE
$40.16 MSRP: $59.50
You Save: $19.34 (33%)
ADD TO CART
Product Specifications
- Other Name: Belt - Accessory Drive; Serpentine Belt Drive Kit; Drive Belt; V-Belt
- Replaces: 53013905AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Jeep Liberty | 65th Anniversary Edition, Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Serpentine Belt Part Number: 5281351AC
$20.53 MSRP: $29.75
You Save: $9.22 (31%)
ADD TO CART
Product Specifications
- Other Name: Belt - Accessory Drive; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2005 Jeep Liberty | Sport | 4 Cyl 2.4 L GAS
View related parts
Jeep Liberty Serpentine Belt Part Number: 5135745AA
Product Specifications
- Other Name: Belt - Accessory Drive; Serpentine Belt Drive Kit; Drive Belt; V-Belt
- Replaces: 53032037AI, 53032037AK, 53032037AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2004 Jeep Liberty | Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Serpentine Belt Part Number: 53013352AD
Product Specifications
- Other Name: Belt - Accessory Drive; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive
- Replaces: 53013352AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2005 Jeep Liberty | Sport | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Jeep Liberty Serpentine Belt Part Number: 68038524AA
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Belt Serpentine; Belt
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Jeep Liberty | Limited, Renegade, Sport | 6 Cyl 3.7 L GAS

Jeep Liberty Drive Belt

Choose OEM Drive Belt that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Drive Belt follows strict manufacturing steps to lock in quality and fit. If your Jeep Liberty matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Liberty parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Drive Belt used in Jeep Liberty is very essential because it links the engine to other parts like the alternator and A/C compressor. Normally, such a belt is used and it passes over these parts and connects them to the crankshaft pulley. This design is very efficient in power delivery and hence the ability of the engine to turn several parts at the same time. In the course of its production, Jeep Liberty has used various types of drive belt among them are the V-belts and the multi-groove belts with distinguishing features. V-belts have good grip and resistant properties while multi-groove belts increase flexibility and performance multiple paths of transmission are available. There are some factors to consider, and while it is common knowledge that Drive Belts has a lifespan of approximately 100000 miles, they may need replacement if the signs appear earlier. A faulty Drive Belt is problematic to the parts and engine of Jeep liberty automobiles as indicated in this document.

Jeep Liberty Drive Belt Parts and Q&A

Serpentine Belt
53013905AC
Q: How to Remove and Replace the Drive Belt on a 3.7L Engine on Jeep Liberty?
A:
The accessory drive belt on a 3.7L engine should be replaced only after checking the pulley condition. Make sure that the new belt is properly placed to avoid the engine from getting too hot because of wrong Water Pump rotation. After installing the belt around all pulleys-except the idler pulley-spin the tensioner arm to its limit point. Tuck the belt around the idler pulley before letting the tensioner turn into the belt so it sits on every pulley. After putting on the belt, examine the peg wear point; the distance allowed between these parts should be no more than 24 mm (0.94 inches). After that, put in the combination washer reservoir/coolant recovery container that has part number 123456.
Serpentine Belt
5135746AA
Q: How to Install the Drive Belt for Power Steering on Jeep Liberty?
A:
Firmly set the power steering belt around the crankshaft pulley and make sure it is in the correct place in the grooves. Later, adjust the top of the power steering belt onto the top of the power steering pulley. It's important to use wire that has nylon locks instead of those with metal. With the power steering pulley turned over, slide a nylon wire tie, 7.75X1/8x.0.050 in., into one hole on the back of the pulley and tighten it to attach the drive belt. With the drive belt in your hand, rotate the engine slowly and clockwise. Once the belt is in place, turn the engine until you hear the wire tie break and take it off the vehicle.