How to Remove and Replace an Outer Tie Rod End on Jeep Liberty?

You should raise and support your vehicle, then remove the wheel and tire and note from which end the new tie rod will be installed. Relax the tie rod end jam nut and take out the outer tie rod end nut (2). Always use the right tool to take apart the ball joints and tie rods, as damaging the ball joint seal or knuckle is possible with other methods. To remove the outer tie rod end from the knuckle, use tool 9360 (2) and count the turns so you can remember the number for the installation. Once done, take out the outer tie rod end (1) from the inner tie rod.

How to Install a Tie Rod End and Adjust the Steering Alignment on Jeep Liberty?

You should apply the same number of rotations when installing the outer tie rod end (3) as you did during previous removal. After that, insert the outer tie rod end (3) into the knuckle and tighten its nut to the specified torque of 108 Nm (80 ft.lbs). After that, secure the jam nut by tightening it to 75 Nm (55 ft.lbs). Then, fit the newly installed wheel and tire to the car and complete everything by setting the toe and centering the steering wheel.

OEM Jeep Liberty Tie Rod End

Steering Rod End

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Tie Rod Ends found

View related parts
Jeep Liberty Outer Tie Rod, Passenger Side Part Number: 52125366AA
$74.43 MSRP: $114.00
You Save: $39.57 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tie Rod - Outer; Steering Tie Rod End, Right Outer; Drag Link Repair Kit; Outer Tie Rod End; Tie Rod End Outer; Tie Rod End
- Position: Outer Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2012 Jeep Liberty | Jet, Limited, Renegade, Sport | 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Outer Tie Rod, Driver Side Part Number: 52125367AA
$51.94 MSRP: $114.00
You Save: $62.06 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tie Rod - Outer; Steering Tie Rod End, Left Outer; Drag Link Repair Kit; Outer Tie Rod End; Tie Rod End Outer; Tie Rod End
- Position: Outer Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2012 Jeep Liberty | Jet, Limited, Renegade, Sport | 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Outer Tie Rod, Driver Side Part Number: 5072445AA
$88.61 MSRP: $118.00
You Save: $29.39 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tie Rod - Tie Rod End; Steering Tie Rod End, Left Outer; Drag Link Repair Kit; Outer Tie Rod End; Tie Rod Kit Outer End; Tie Rod End
- Position: Outer Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2005 Jeep Liberty | Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Outer Tie Rod, Passenger Side Part Number: 5072444AA
$93.35 MSRP: $122.00
You Save: $28.65 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tie Rod - Tie Rod End; Steering Tie Rod End, Right Outer; Drag Link Repair Kit; Outer Tie Rod End; Tie Rod Kit Outer End; Tie Rod End
- Position: Outer Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2005 Jeep Liberty | Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Outer Tie Rod Part Number: 52125484AA
$71.19 MSRP: $108.00
You Save: $36.81 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tie Rod - Outer; Drag Link Repair Kit; Outer Tie Rod End
- Position: Outer
- Replaces: 5189419AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Jeep Liberty | 65th Anniversary Edition, Limited, Renegade, Sport | 2.8L L4, 3.7L V6, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Outer Tie Rod Part Number: 52125483AA
$68.68 MSRP: $103.00
You Save: $34.32 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tie Rod - Outer; Drag Link Repair Kit; Outer Tie Rod End
- Position: Outer
- Replaces: 68003671AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Jeep Liberty | 65th Anniversary Edition, Limited, Renegade, Sport | 2.8L L4, 3.7L V6, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS

Jeep Liberty Tie Rod End

Choose OEM Tie Rod End that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Tie Rod End follows strict manufacturing steps to lock in quality and fit. If your Jeep Liberty matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Liberty parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Tie Rod End is used in Jeep Liberty cars and is integrated into the steering system to which the steering rack and the steering knuckles are connected. This link is very important for the lateral stability of the vehicle concerned and also for the fine control of direction. The Tie Rod End consists of two components: the inner tie rod end and the outer tie rod end which are used when steering to ensure that the two functions harmoniously. In the course of its production, several kinds of Jeep Liberty Tie Rod End may have been applied, however, particular types are not described. This primary function also does not change with these different types and the basic purpose is to guarantee that the car gives a good steering grip. It is equally pertinent that one should know what a tie rod end is and how the proper functioning of this Jeep Liberty part contributes to the vehicle's handling and safety system.

Jeep Liberty Tie Rod End Parts and Q&A

Outer Tie Rod, Passenger Side
52125366AA
Q: How to Remove and Replace an Outer Tie Rod End on Jeep Liberty?
A:
You should raise and support your vehicle, then remove the wheel and tire and note from which end the new tie rod will be installed. Relax the tie rod end jam nut and take out the outer tie rod end nut (2). Always use the right tool to take apart the Ball Joints and tie rods, as damaging the ball joint seal or knuckle is possible with other methods. To remove the outer tie rod end from the knuckle, use tool 9360 (2) and count the turns so you can remember the number for the installation. Once done, take out the outer tie rod end (1) from the inner tie rod.
Outer Tie Rod
52125484AA
Q: How to Install a Tie Rod End and Adjust the Steering Alignment on Jeep Liberty?
A:
You should apply the same number of rotations when installing the outer tie rod end (3) as you did during previous removal. After that, insert the outer tie rod end (3) into the knuckle and tighten its nut to the specified torque of 108 Nm (80 ft.lbs). After that, secure the jam nut by tightening it to 75 Nm (55 ft.lbs). Then, fit the newly installed wheel and tire to the car and complete everything by setting the toe and centering the Steering Wheel.