How to Install a Hydraulic Hose for a Clutch Master Cylinder on Jeep Patriot?

First, install the clutch master cylinder before fitting the hydraulic hose for it. Simply place the tube into the master cylinder mounting hole and attach it with the security clip. Link the supply hose from the clutch master to the reservoir of the brake master cylinder and check that the reservoir is full and its cover is taken off. Clamp the clutch master cylinder's body onto the clutch pedal and use a 1/4 turn to fasten it. Ensure the rod from the clutch master connects to the clutch pedal and a "click" can be heard. Put in the lower instrument panel bezel and restore negative voltage by hooking up the negative battery cable. Following this, fit the air cleaner assembly and confirm that the brake master cylinder reservoir is full, refilling with DOT 3 brake fluid when it's needed. Pump the clutch lines and handle the pedal repeatedly at least fifteen times until all the air escapes and is collected in the reservoir. If some air is still caught in the system, pressure-bleed the Air-Supply System again. Don't forget to check that the clutch release system is operating properly.

How to Effectively Service and Repair a Hydraulic Hose on Jeep Patriot?

Open the vehicle by removing the engine cover and air cleaner assembly before beginning with the hydraulic hose. Start by unplugging the battery's negative cable, then take off the lower instrument panel bezel. Following this, remove the pushrod connected to the clutch pedal. By releasing the retaining clip and pulling away the hydrolic tube, the supply tube can be disconnected at the clutch master cylinder. To empty the master cylinder and stainless steel tubing, take off the brake master cylinder cap and drain the liquid into a proper container. Release the supply line that links the master brake to the clutch cylinder and cover or collect any fluid that leaks out of the master cylinder reservoir with the cap so it is not spilled. Handle the clutch master cylinder with care as it is removed, since doing so improperly can harm the tube and result in the clutch being released incorrectly upon installation. Please note that spilled brake fluid may damage your vehicle's paint; be sure to clean it up quickly with water. After all is finished, rotate the master cylinder assembly 1/4 turn and gently pull the hydraulic pipe out of the retainer and through the engine compartment.

OEM Jeep Patriot Hydraulic Hose

Brake Hydraulic Line

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Hydraulic Hoses found

View related parts
Jeep Patriot Flex Hose, Front Passenger Side Part Number: 4877604AD
$48.05 MSRP: $70.25
You Save: $22.20 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Line - Brake; Brake Hydraulic Hose, Front Right; Hydraulic Hose; Brake Line
- Position: Front Passenger Side
- Replaces: 68038282AC, 5105604AC, 68038282AA, 68038282AB, 5105604AE, 4877604AA, 4877604AB, 5105604AD, 4877604AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2017 Jeep Patriot | 75th Anniversary, Latitude, Latitude X, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Patriot Flex Hose, Rear Inner Passenger Side Part Number: 68171911AA
$22.98 MSRP: $34.00
You Save: $11.02 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Brake; Brake Hydraulic Hose, Rear Outer, Rear Right Inner; Brake Hose; Brake Line; Hose Brake; Hydraulic Hose
- Position: Rear Inner Passenger Side
- Replaces: 5105654AA, 68171911AB, 68038934AA, 5105654AB, 68038934AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Jeep Patriot | Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Patriot Flex Hose, Rear Outer Part Number: 68171914AA
$28.20 MSRP: $41.75
You Save: $13.55 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Brake; Brake Hydraulic Hose, Rear Outer; Brake Hose; Brake Line; Hose Brake; Hydraulic Hose
- Position: Rear Outer
- Replaces: 5085960AB, 5085960AC, 68171914AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2017 Jeep Patriot | 75th Anniversary, Latitude, Latitude X, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Patriot Flex Hose, Rear Inner Passenger Side Part Number: 68171909AB
Product Specifications
- Other Name: Line - Brake; Brake Hydraulic Hose, Rear Right, Rear Right Inner; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear Inner Passenger Side
- Replaces: 68038280AA, 68171909AA, 5105426AC, 5105426AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2017 Jeep Patriot | Latitude, Latitude X, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Patriot Brake Hose, Rear Driver Side Part Number: 68171907AB
Product Specifications
- Other Name: Line - Brake; Brake Hydraulic Hose, Rear Left, Rear Left Inner
- Position: Rear Driver Side
- Replaces: 5105605AB, 5105605AC, 68171907AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2017 Jeep Patriot | 75th Anniversary, Latitude, Latitude X, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Patriot Flex Hose, Front Part Number: 4877603AD
Product Specifications
- Other Name: Line - Brake; Brake Hydraulic Hose, Front Left; Brake Line
- Position: Front
- Replaces: 4877603AC, 4877603AA, 5105603AC, 5105603AD, 68038281AA, 4877603AB, 5105603AE, 68038281AB, 68038281AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2017 Jeep Patriot | 75th Anniversary, Latitude, Latitude X, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

Jeep Patriot Hydraulic Hose

Choose OEM Hydraulic Hose that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Hydraulic Hose follows strict manufacturing steps to lock in quality and fit. If your Jeep Patriot matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Patriot parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Jeep Patriot Hydraulic Hose serves as an indispensable part which sustains the performance and durability features of Jeep Patriot automobiles. The Hydraulic Hose functions tomove hydraulic fluid among key components particularly power steering and brakes thus promoting efficient force transfer alongside higher safety and operational performance. A high-quality Hydraulic Hose enhances the durability and off-road performance of Jeep Patriot vehicles because it can manage both high pressures and temperature demands. This Hydraulic Hose shows flexibility through its support for Sport, Latitude, and Limited trims of Jeep Patriot vehicles thus proving essential for the vehicle's hydraulic system. Routinely servicing and checking the Hydraulic Hose remains essential for leak prevention and peak operational performance to safeguard hydraulic functions of the car vehicle. Ultra-advanced material construction of the car Hydraulic Hose provides market-leading durability to the automotive sector. The hydraulic hose demonstrates Jeep's dedication to quality because it successfully maintains performance under challenging driving conditions. This component gives the manufacturer Patriot vehicles the ability to deliver better efficiency and safety through dual on-road and off-road capabilities. The car part showcases the brand's dedication to reliability and performance thereby becoming an integral part of every the automaker model vehicle.

Jeep Patriot Hydraulic Hose Parts and Q&A

Flex Hose, Front Passenger Side
4877604AD
Q: How to Install a Hydraulic Hose for a Clutch Master Cylinder on Jeep Patriot?
A:
First, install the clutch master cylinder before fitting the hydraulic hose for it. Simply place the tube into the master cylinder mounting hole and attach it with the security clip. Link the supply hose from the clutch master to the reservoir of the brake master cylinder and check that the reservoir is full and its cover is taken off. Clamp the clutch master cylinder's body onto the clutch pedal and use a 1/4 turn to fasten it. Ensure the rod from the clutch master connects to the clutch pedal and a "click" can be heard. Put in the lower instrument panel bezel and restore negative voltage by hooking up the negative Battery Cable. Following this, fit the air cleaner assembly and confirm that the brake master cylinder reservoir is full, refilling with DOT 3 brake fluid when it's needed. Pump the clutch lines and handle the pedal repeatedly at least fifteen times until all the air escapes and is collected in the reservoir. If some air is still caught in the system, pressure-bleed the Air-Supply System again. Don't forget to check that the clutch release system is operating properly.
Flex Hose, Rear Outer
68171914AA
Q: How to Effectively Service and Repair a Hydraulic Hose on Jeep Patriot?
A:
Open the vehicle by removing the engine cover and air cleaner assembly before beginning with the hydraulic hose. Start by unplugging the battery's negative cable, then take off the lower instrument panel bezel. Following this, remove the pushrod connected to the clutch pedal. By releasing the retaining clip and pulling away the hydrolic tube, the supply tube can be disconnected at the clutch master cylinder. To empty the master cylinder and stainless steel tubing, take off the Brake Master Cylinder cap and drain the liquid into a proper container. Release the supply line that links the master brake to the clutch cylinder and cover or collect any fluid that leaks out of the master cylinder reservoir with the cap so it is not spilled. Handle the clutch master cylinder with care as it is removed, since doing so improperly can harm the tube and result in the clutch being released incorrectly upon installation. Please note that spilled brake fluid may damage your vehicle's paint; be sure to clean it up quickly with water. After all is finished, rotate the master cylinder assembly 1/4 turn and gently pull the hydraulic pipe out of the retainer and through the engine compartment.