How to Install the Intake Manifold Temperature Sensor on Jeep Patriot?

The intake manifold temperature sensor installation requires you to first insert the sensor into the clean duct and connect the electrical connector afterward. To finish, join the hook of the negative battery cable to the battery.

How to Service and Repair the Intake Manifold Temperature Sensor for the 2.0/2.4L Engine on Jeep Patriot?

First, you should find the Intake Manifold Temperature Sensor in the clean air duct before undertaking the repair and service process. Place the sensor adequately before putting the connector onto it. After that, attach the cable from the negative terminal.

OEM Jeep Patriot Intake Manifold Temperature Sensor

Air Intake Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Intake Manifold Temperature Sensors found

View related parts
Jeep Patriot Temperature Sensor Part Number: 4606487AB
$67.13 MSRP: $99.05
You Save: $31.92 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Charge Air Temperature; Air Charge Temperature Sensor; Intake Air Temperature Sensor; Air Temperature Sensor; Air Intake Temperature Sensor; Charge Temperature Sensor; Sensor; Sensor Charge Air Temperature
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2017 Jeep Patriot | 75th Anniversary, Latitude, Latitude X, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Patriot Mass Air Flow Sensor Part Number: 5149264AB
$25.31 MSRP: $37.20
You Save: $11.89 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Temperature; Ambient Air Temperature Sensor; Air Charge Temperature Sensor; Intake Air Temperature Sensor; Temperature Sensor; Ambient, Air, and Intake Temperature Sensor.
- Replaces: 5149264AA, 5293138AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2017 Jeep Patriot | 75th Anniversary, Latitude, Latitude X, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

Jeep Patriot Intake Manifold Temperature Sensor

Choose OEM Intake Manifold Temperature Sensor that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Intake Manifold Temperature Sensor follows strict manufacturing steps to lock in quality and fit. If your Jeep Patriot matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Patriot parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Intake Manifold Temperature Sensor which is used in Jeep Patriot vehicles is used to monitor the temperature of the air getting into the manifold chamber so that combustion efficiency can be well achieved in the engine mechanism. This data is sent to the Powertrain Control Module (PCM), which trims the fuel injector timing so as to achieve the correct air/fuel mixture while working under different conditions. Varying styles of Intake Manifold Temperature Sensors may be fitted in different models of the Jeep Patriot over the years, some of which may have been factory tuned for a particular airflow rate. An incorrect sensor may cause incorrect speed or an air/fuel mixture problems that bring about stalling and setting off of a Diagnostic Trouble Code (DTC) and, therefore, the CHECK ENGINE light. Periodic inspection of a particular air intake system is necessary, to allow avoiding the influence of unwanted air on the work of the engine.

Jeep Patriot Intake Manifold Temperature Sensor Parts and Q&A

Temperature Sensor
4606487AB
Q: How to Install the Intake Manifold Temperature Sensor on Jeep Patriot?
A:
The intake manifold temperature sensor installation requires you to first insert the sensor into the clean duct and connect the electrical connector afterward. To finish, join the hook of the negative Battery Cable to the battery.
Mass Air Flow Sensor
5149264AB
Q: How to Service and Repair the Intake Manifold Temperature Sensor for the 2.0/2.4L Engine on Jeep Patriot?
A:
First, you should find the Intake Manifold Temperature Sensor in the clean Air Duct before undertaking the repair and service process. Place the sensor adequately before putting the connector onto it. After that, attach the cable from the negative terminal.