How to Properly Reinstall a TPMS Sensor on a Wheel on Jeep Patriot?

It is very important to put on new TPM seal, metal washer and nut on the valve when securing your TPM sensor so that there is a proper seal around your sensor. Carefully wipe around the sensor/valve stem mounting hole and remove any dirt from the wheel's surface. Be sure to press the rim of the rear valve part during insertion to stop the sensor from interfering with the sensor antenna strap. Hold the side with the pot on it toward the wheel and screw the sensor nut into place by hand. Shove down on the sensor housing to fit into the wheel depression, tighten the nut to 6.5 Nm before turning it with the wrench. Be careful not to force the sensor nut, since only a small excess can pull the sensor away from the valve stem. While mounting, place the sensor valve stem about 210° from the heads of rotating wheel changers or from the installation side of rotating tool changers, so it doesn't get near the lower bead breaker area. Once done mounting the tire, use the specifications from the Tire Inflation Pressure Label and secure the original style and color valve stem cap. Place the tire and wheel set on the vehicle, tighten the mounting nuts up to 135 Nm. Drop the vehicle from where it is and enable the system to scan the new sensor ID by using the TPM-RKE Analyzer or by driving it for at least 10 minutes above 15 mph. Should a sensor be unable to train, the appropriate guidance from relevant diagnostic information should be reviewed.

OEM Jeep Patriot TPMS Sensor

Tire Pressure Monitoring System Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 TPMS Sensors found

View related parts
Jeep Patriot TPMS Sensor Part Number: 68406531AA
$67.06 MSRP: $151.00
You Save: $83.94 (56%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Tire Pressure; TPMS Sensor Valve Assembly; Service Kit; Tire Pressure Sensor; Sensor
- Replaces: 56029359AB, 56029359AA, 56029481AA, 56029481AB, 56029359AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013-2017 Jeep Patriot | 75th Anniversary, Latitude, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Patriot TPMS Sensor Part Number: 68406530AA
$69.52 MSRP: $155.00
You Save: $85.48 (56%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Tire Pressure; Tire Pressure Monitoring System Sensor; TPMS Sensor Service Kit; Tire Pressure Sensor; Pressure Sensor; Sensor
- Replaces: 56029479AB, 56053036AA, 56029465AA, 56029479AA, 56029465AB, 56029465AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2017 Jeep Patriot | 75th Anniversary, Latitude, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Patriot TPMS Sensor Part Number: 68078861AC
$106.43 MSRP: $161.00
You Save: $54.57 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Tire Pressure; Tire Pressure Monitoring System Sensor; TPMS Sensor Service Kit; Tire Pressure Sensor; Pressure Sensor; Hardware Kit; Sensor
- Replaces: 68078861AA, 68001696AA, 56053030AB, 68001696AB, 68078861AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2013 Jeep Patriot | Latitude, Latitude X, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

Jeep Patriot TPMS Sensor

Choose OEM TPMS Sensor that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each TPMS Sensor follows strict manufacturing steps to lock in quality and fit. If your Jeep Patriot matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Patriot parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

This Jeep Patriot TPMS Sensor is an essential system that shows that the Jeep vehicle manufacturing company does not compromise on the reliability and performance of the vehicles that they sell to their consumers. A TPMS Sensor is a system that is particularly appropriate for Jeep Patriot models manufactured between 2006 and 2017; its significant function is to keep track of the amount of pressure in the tires and inform the driver if the pressure is too high or too low, thereby increasing the risk of an accident due to a blowout. The Jeep Patriot model is equipped with both the indirect TPMS or iTPMS and the direct TPMS or dTPMS, providing adaptability according to customer preference. As a result, while iTPMS information comprises friendly interfaces in terms of software estimations, the dTPMS offers battery operated sensors that supply updated pressure outputs and increase the efficacy and security. However, this feature is of more importance to the Jeep Patriot car users who may need accurate monitoring during their trips or trips. The Jeep Patriot TPMS Sensor works for the different model trims like the Sport, Latitude, and the Limited to make sure all the existing motorists get the benefits of this enhanced innovation. Moreover, its capacity to trigger used light signals on the dashboard in case the tire pressure is low makes the Jeep Patriot safe. Not only does the Jeep Patriot TPMS Sensor enhance the efficiency of the car through its structure and features including its durability, but it also helps Jeep solidify its position in the automobile sector for strength and reliability.

Jeep Patriot TPMS Sensor Parts and Q&A

TPMS Sensor
68078861AC
Q: How to Properly Reinstall a TPMS Sensor on a Wheel on Jeep Patriot?
A:
It is very important to put on new TPM seal, metal washer and nut on the valve when securing your TPM sensor so that there is a proper seal around your sensor. Carefully wipe around the sensor/valve stem mounting hole and remove any dirt from the wheel's surface. Be sure to press the rim of the rear valve part during insertion to stop the sensor from interfering with the sensor antenna strap. Hold the side with the pot on it toward the wheel and screw the sensor nut into place by hand. Shove down on the sensor housing to fit into the wheel depression, tighten the nut to 6.5 Nm before turning it with the wrench. Be careful not to force the sensor nut, since only a small excess can pull the sensor away from the valve stem. While mounting, place the sensor valve stem about 210° from the heads of rotating wheel changers or from the installation side of rotating tool changers, so it doesn't get near the lower bead breaker area. Once done mounting the tire, use the specifications from the Tire Inflation Pressure Label and secure the original style and color valve stem cap. Place the tire and wheel set on the vehicle, tighten the mounting nuts up to 135 Nm. Drop the vehicle from where it is and enable the system to scan the new sensor ID by using the TPM-RKE Analyzer or by driving it for at least 10 minutes above 15 mph. Should a sensor be unable to train, the appropriate guidance from relevant diagnostic information should be reviewed.