How to Service and Repair a Transmission Mount on Jeep Grand Cherokee?

The first step to fixing the transmission mount is to take out the engine bending braces which help support the powertrain and lower NVH on the car, with the same process used on the left and right sides of the car, although only the right is shown in the illustration. Raise and secure the vehicle first and afterward, remove the bolt holding the exhaust hanger bracket. After that, take away the locknut and the transmission bending brace bar, then the engine-to-bending brace retaining bolt, bending brace bar and cross bar. Tighten the clamps or screws that keep the bends together only once the bending braces are all correctly placed. Put the cross brace between the engine-to-transmission brace and then install its retaining bolt. Set the transmission bending brace onto the through brace and fix it in place with a new locknut. Secure the exhaust hanger and transmission brace by screwing the retaining bolt into it. Afterward, fasten the engine-to-transmission brace retaining bolt to 40 Nm (30 ft. lbs.), the transmission brace retaining bolts to 40 Nm (30 ft. lbs.) and finally, tighten the transmission brace retaining lock nuts to 108 Nm (80 ft. lbs.).

How to Service a Transmission Mount on Jeep Liberty?

Before servicing the transmission mount, take off the negative cable from the battery and raise the car to support the transmission. Unscrew the nuts holding the support cushion to the crossmember and pull the crossmember out. After that, remove the support cushion nuts, the cushion and the bracket bolts to free the bracket from the transmission. During installation, place the driver end plate onto the transmission and use bolts tightened to 46 Nm (34 ft. lbs.) torque. After that, fit the support cushion to the support bracket and screw in the nuts so the torque is 75 Nm (55 ft. lbs.). Put the crossmember over the support cushion studs, fix the stud nuts in place and tighten these nuts to 22 Nm (192 in. lbs.). After that, install your crossmember-to-sill bolts snugly at 41 Nm (30 ft. lbs.) and then remove the transmission support, lower the vehicle and reattach the negative cable.

OEM Jeep Transmission Mount

Transfer Case Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

191 Transmission Mounts found

View related parts
Jeep Transmission Mount Part Number: 68309249AB
$226.60 MSRP: $338.00
You Save: $111.40 (33%)
ADD TO CART
Product Specifications
- Other Name: Insulator - Engine Mount; Automatic Transmission Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Side Mount; Front Mount; Rear Mount
- Replaces: 5105667AF, 5105667AC, 5105667AB, 68309249AA, 5105667AG, 5105667AE, 5105667AD
Fits the following Jeep Models:
- Compass | 2007-2017 | 75th Anniversary, Altitude, Base, High Altitude, Latitude, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
- Patriot | 2009-2017, 2007 | 75th Anniversary, Latitude, Latitude X, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Front Mount Part Number: 68253029AC
$58.63 MSRP: $86.45
You Save: $27.82 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Transmission Mount; Engine Torque Strut; Engine Mount Bracket; Motor Mount; Rear Mount; Isolator Transmission Mount Torque Strut; Isolator Transmission Mount
- Replaces: 68253030AC, 68253029AB, 68253030AB
Fits the following Jeep Models:
- Compass | 2017-2022 | 80th Anniversary, Altitude, High Altitude, Latitude, Latitude Lux, Limited, Red, Sport, Trailhawk, Upland | 4 Cyl 2.4 L GAS
View related parts
Jeep Rear Mount Part Number: 68363996AA
$104.05 MSRP: $158.00
You Save: $53.95 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support; Automatic Transmission Mount; Engine Mount Support Bracket; Engine Mount Bracket; Motor Mount; Bracket; Engine Mount Rear; Support Engine; Transmission Mount
- Replaces: 68254476AA, 68323788AA, 68246475AA
Fits the following Jeep Models:
- Renegade | 2015-2023 | 75th Anniversary, 80th Anniversary, Altitude, Dawn Of Justice, High Altitude, Islander, Jeepster, Latitude, Limited, Red, Sport, Trailhawk, Upland | 2.4L L4, 4 Cyl 1.3 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Jeep Transmission Mount Part Number: 52124104AC
$63.69 MSRP: $131.00
You Save: $67.31 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Transmission Support; Automatic Transmission Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount; Insulator Transmission Support
- Replaces: 52124104AB
Fits the following Jeep Models:
- Commander | 2006-2009 | Limited, Overland | 8 Cyl 5.7 L GAS
- Grand Cherokee | 2005-2009 | Limited, Overland | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Jeep Transmission Mount Part Number: 52089932AH
$87.59 MSRP: $132.00
You Save: $44.41 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Transmission Support; Automatic Transmission Mount; Transfer Case Mount; Insulator Transmission Support
- Replaces: 52089932AG
Fits the following Jeep Models:
- Commander | 2006-2010 | 65th Anniversary Edition, Base, Sport | 6 Cyl 3.7 L GAS
- Grand Cherokee | 2005-2010 | 65th Anniversary Edition, Laredo, Limited | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Mount Bracket, Lower Part Number: 68172353AD
$96.93 MSRP: $146.00
You Save: $49.07 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Automatic Transmission Mount Bracket, Lower; Engine Mount Bracket; Motor Mount; Bracket; Bracket Engine Mount
- Position: Lower
- Replaces: 68172353AC, 68172353AB
Fits the following Jeep Models:
- Cherokee | 2014-2022 | 75th Anniversary, 80th Anniversary, Altitude, High Altitude, Latitude, Latitude Lux, Latitude Plus, Limited, Overland, Sport, Trailhawk, Trailhawk Elite, Upland, X | 2.4L L4, 3.2L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.2 L GAS
View related parts
Jeep Transmission Mount Part Number: 5154807AE
$114.24 MSRP: $152.00
You Save: $37.76 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Transmission Mount; Automatic Transmission Mount; Transfer Case Mount; Mount; Isolator Transmission Mount
- Replaces: 5154807AD, 5154807AC
Fits the following Jeep Models:
- Grand Cherokee | 2014-2022 | 4xe, 75th Anniversary, Altitude, High Altitude, Laredo, Laredo E, Laredo X, Limited, Limited X, Overland, Summit, Summit Reserve, Trailhawk, Upland | 3.6L V6, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.6 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Jeep Rear Mount Part Number: 68258599AA
$110.22 MSRP: $166.00
You Save: $55.78 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator; Automatic Transmission Mount; Engine Mount Rear
Fits the following Jeep Models:
- Renegade | 2015-2017 | 75th Anniversary, Dawn Of Justice, Latitude, Limited, Sport, Trailhawk | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Jeep Motor Mount, Passenger Side Part Number: 68236159AB
$188.08 MSRP: $282.00
You Save: $93.92 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Mount; Engine Mount, Right; Engine Mount Bracket; Mount; Isolator Engine Mount Right Side; Isolator Engine Mount
- Position: Passenger Side
- Replaces: 68236159AA
Fits the following Jeep Models:
- Wrangler | 2018-2020 | Rubicon, Sport, Sport S, Unlimited Moab, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S | 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L MILD HYBRID EV-GAS (MHEV)
View related parts
Jeep Transmission Mount, Rear Part Number: 68240438AA
$68.69 MSRP: $90.75
You Save: $22.06 (25%)
ADD TO CART
Product Specifications
- Other Name: Insulator - Transmission Mount; Automatic, Rear; Engine Bracket; Transfer Case; Motor; Rear Mount; Isolator Transmission Mount
- Position: Rear
- Replaces: 68172350AC, 68172350AD, 68172350AB, 68172349AB
Fits the following Jeep Models:
- Cherokee | 2014-2018 | 75th Anniversary, Latitude, Limited, Overland, Sport, Trailhawk | 3.2L V6, 6 Cyl 3.2 L GAS
View related parts
Jeep Transmission Mount Part Number: 68110244AE
$62.33 MSRP: $93.40
You Save: $31.07 (34%)
ADD TO CART
Product Specifications
- Other Name: Insulator - Transmission Mount; Automatic Transmission Mount; Transfer Case Mount; Isolator Transmission Mount
- Replaces: 68110244AC, 68110244AD
Fits the following Jeep Models:
- Grand Cherokee | 2014-2021 | 80th Anniversary, Altitude, High Altitude, Laredo, Laredo E, Laredo X, Limited, Limited X, Overland, SRT, Summit, Trackhawk, Trailhawk, Upland | 5.7L V8, 6 Cyl 3.6 L FLEX, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
- Grand Cherokee WK | 2022 | Laredo E, Laredo X, Limited | 6 Cyl 3.6 L FLEX
View related parts
Jeep Transmission Mount Part Number: 68032661AF
$75.65 MSRP: $114.00
You Save: $38.35 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Isolator - Transmission Mount; Automatic Transmission Mount; Transfer Case Mount
- Replaces: 68032661AD, 68032661AC, 68032661AE, 68032662AC
Fits the following Jeep Models:
- Grand Cherokee | 2011-2017 | 75th Anniversary, Laredo, Limited, Overland, Overland Summit, Summit, Trailhawk | 3.6L V6, 6 Cyl 3.6 L FLEX
View related parts
Jeep Transmission Mount Part Number: 5147193AB
$86.58 MSRP: $130.00
You Save: $43.42 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Transmission Mount; Automatic Transmission Mount; Transfer Case Mount; Isolator Transmission Mount
- Replaces: 5147193AA
Fits the following Jeep Models:
- Wrangler | 2012-2017 | 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S | 3.6L V6, 6 Cyl 3.6 L GAS
- Wrangler JK | 2018 | Rubicon, Sahara, Sport, Sport S, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S | 6 Cyl 3.6 L GAS
View related parts
Jeep Front Mount Part Number: 5038548AC
$165.08 MSRP: $247.00
You Save: $81.92 (34%)
ADD TO CART
Product Specifications
- Other Name: Isolator - Engine Mount; Engine Mount; Engine Mount Bracket; Motor Mount; Mount; Isolator; Isolator Engine Mount
- Replaces: 5038548AB, 5038548AA
Fits the following Jeep Models:
- Grand Cherokee | 2012-2021 | SRT, SRT8 | 6.4L V8, 8 Cyl 6.4 L GAS
View related parts
Jeep Transmission Mount Part Number: 52125450AC
$215.27 MSRP: $317.00
You Save: $101.73 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Transmission Mount; Automatic Transmission Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount; Bracket Transmission Mount
- Replaces: 52125136AC, 52125450AB, 52125136AB, 52125450AA, 52125136AF, 52125136AD, 52125136AE
Fits the following Jeep Models:
- Liberty | 2006-2012 | 65th Anniversary Edition, Jet, Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Side Mount, Front Driver Side Part Number: 68418876AB
$237.93 MSRP: $353.00
You Save: $115.07 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Transmission Mount; Engine Mount, Front Left; Engine Mount Bracket; Motor Mount; Isolator; Isolator Transmission Mount
- Position: Front Driver Side
- Replaces: 68164709AG, 68164709AC, 68418876AA, 68164709AE, 68164709AF, 68190606AE, 68190606AB, 68190606AC, 68190606AF, 68190606AD, 68270563AA, 68164709AD
Fits the following Jeep Models:
- Cherokee | 2014-2023 | 75th Anniversary, 80th Anniversary, Altitude, Altitude Lux, High Altitude, Latitude, Latitude Plus, Limited, Overland, Sport, Trailhawk | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Jeep Side Mount, Driver Side Part Number: 68270565AB
$270.79 MSRP: $400.00
You Save: $129.21 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Isolator - Transmission Mount; Engine Mount, Left; Engine Mount Bracket; Motor Mount; Isolator; Isolator Transmission Mount
- Position: Driver Side
- Replaces: 68270565AA, 68164710AF
Fits the following Jeep Models:
- Cherokee | 2014-2022 | 75th Anniversary, 80th Anniversary, Altitude, High Altitude, Latitude, Latitude Lux, Latitude Plus, Limited, Overland, Sport, Trailhawk, Trailhawk Elite, Upland, X | 3.2L V6, 6 Cyl 3.2 L GAS
View related parts
Jeep Upper Bracket Part Number: 68184357AC
$52.44 MSRP: $76.90
You Save: $24.46 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Torque Strut; Automatic Transmission Mount Bracket, Upper; Bracket; Bracket Torque Strut
- Position: Upper
- Replaces: 68184357AB
Fits the following Jeep Models:
- Cherokee | 2014-2018 | 75th Anniversary, Latitude, Latitude Plus, Limited, Overland, Sport, Trailhawk | 2.4L L4, 3.2L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.2 L GAS
View related parts
Jeep Transmission Mount Part Number: 52059945AB
$102.36 MSRP: $155.00
You Save: $52.64 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Isolator - Transmission Mount; Automatic Transmission Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount; Insulator Transmission Support; Isolator Transmission Mount
Fits the following Jeep Models:
- Wrangler | 2007-2011 | 70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X, X-S | 6 Cyl 3.8 L GAS
View related parts
Jeep Front Mount Part Number: 68252522AA
$106.11 MSRP: $159.00
You Save: $52.89 (34%)
ADD TO CART
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount; Engine Mount Bracket; Motor Mount; Mount; Isolator; Isolator Engine Mount
- Replaced by: 68252522AB
- Replaces: 68110951AC, 68110951AB, 68110951AA, 52124675AG
Fits the following Jeep Models:
- Grand Cherokee | 2011-2021 | High Altitude, Laredo, Limited, Limited X, Overland, Overland Summit, Summit, Trailhawk | 8 Cyl 5.7 L GAS

| Page 1 of 10 |Next >

1-20 of 191 Results

Jeep Transmission Mount

OEM parts sourced directly from Jeep deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Jeep Transmission Mount for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

Jeep Transmission Mount Parts and Q&A

Trans Crossmember
52058940AD
Q: How to Service and Repair a Transmission Mount on Jeep Grand Cherokee?
A:
The first step to fixing the transmission mount is to take out the engine bending braces which help support the powertrain and lower NVH on the car, with the same process used on the left and right sides of the car, although only the right is shown in the illustration. Raise and secure the vehicle first and afterward, remove the bolt holding the exhaust hanger bracket. After that, take away the locknut and the transmission bending brace bar, then the engine-to-bending brace retaining bolt, bending brace bar and cross bar. Tighten the clamps or screws that keep the bends together only once the bending braces are all correctly placed. Put the cross brace between the engine-to-transmission brace and then install its retaining bolt. Set the transmission bending brace onto the through brace and fix it in place with a new locknut. Secure the exhaust hanger and transmission brace by screwing the retaining bolt into it. Afterward, fasten the engine-to-transmission brace retaining bolt to 40 Nm (30 ft. lbs.), the transmission brace retaining bolts to 40 Nm (30 ft. lbs.) and finally, tighten the transmission brace retaining lock nuts to 108 Nm (80 ft. lbs.).
Transmission Mount
52059324AA
Q: How to Service a Transmission Mount on Jeep Liberty?
A:
Before servicing the transmission mount, take off the negative cable from the battery and raise the car to support the transmission. Unscrew the nuts holding the support cushion to the crossmember and pull the crossmember out. After that, remove the support cushion nuts, the cushion and the bracket bolts to free the bracket from the transmission. During installation, place the driver end plate onto the transmission and use bolts tightened to 46 Nm (34 ft. lbs.) torque. After that, fit the support cushion to the support bracket and screw in the nuts so the torque is 75 Nm (55 ft. lbs.). Put the crossmember over the support cushion studs, fix the stud nuts in place and tighten these nuts to 22 Nm (192 in. lbs.). After that, install your crossmember-to-sill bolts snugly at 41 Nm (30 ft. lbs.) and then remove the transmission support, lower the vehicle and reattach the negative cable.