How to Service and Repair an Ignition Lock Cylinder on Jeep Wrangler?

The first step in servicing or fixing the ignition lock cylinder is to access and take out the Steering Column Control Module (Sccm) from the steering column. After that, unscrew the screw on the lock cylinder housing and release the retainer fingers from the Skreem/Wcm before taking it off the ring. Turn the switch to Run with the key inside and use an appropriate tool to tap on the tab on the key cylinder through the slot in the housing. Carry the cylinder out by removing it and the key all together. Take off the Torx(R) Plus (five point) 30 bit screws securing the lock cylinder housing to the steering column and after that, remove the lock cylinder housing from the column. After this, remove the screw from the ignition module mount and pull it straight off the tabs that attach it to the lock cylinder housing.

How to Remove and Install the Ignition Lock Cylinder on Jeep Wrangler?

An ignition key in the key cylinder is necessary to remove the ignition lock cylinder. Start by taking out the negative battery cable from the battery. To park an automatic transmission car, set the gear shift to the PARK position. Set the key to ON and you will see a small button near the base of the key cylinder. Insert a pin punch or small screwdriver through the lower cover's tang hole, pull the key cylinder out as you push the pin up. When installing, if your vehicle is automatic, set the shifter in PARK and then push the key cylinder into the steering column until it snaps into the ON position. Make sure the switch does what it is supposed to do; always lock the transmission lever in PARK after taking your key out for an automatic car. Should you find it tough to rotate the key or remove it, the shift lever-to-steering column cable might be damaged and require a replacement. Always ensure the key on a manual transmission isn't removable until the release lever has been pushed; if it can be removed without working the release lever, the steering column needs to be replaced. Reconnect the negative cable to the battery and make sure the switch is properly working.

OEM Jeep Wrangler Ignition Lock Cylinder

Ignition Key Lock Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Ignition Lock Cylinders found

View related parts
Jeep Wrangler Ignition Lock Cylinder, Black Part Number: 4746667
$53.68 MSRP: $75.65
You Save: $21.97 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder/Lock - Ignition Module; Lock Cylinder; Cylinder Lock Package Ignition Black Plastic; Cylinder Lock Package
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2000 Jeep Wrangler | SE, Sahara, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
Jeep Wrangler Ignition Lock Cylinder Part Number: 5139207AA
$118.58 MSRP: $209.00
You Save: $90.42 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder - Ignition Lock; Lock Cylinder; Ignition Cylinder; Cylinder & Keys; Cylinder Ignition Lock
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Jeep Wrangler | 65th Anniversary Edition, Rubicon, SE, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 6 Cyl 4.0 L GAS
View related parts
Jeep Wrangler Ignition Lock Cylinder Part Number: 5179511AA
$66.62 MSRP: $98.05
You Save: $31.43 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder - Ignition Lock; Lock Cylinder; Ignition Cylinder; No internal components.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2017 Jeep Wrangler | 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
View related parts
Jeep Wrangler Ignition Lock Cylinder Part Number: 5083915AB
$143.89 MSRP: $214.00
You Save: $70.11 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Lock - Ignition Lock; Lock Cylinder; Ignition Cylinder; Cylinder & Keys; Cylinder Ignition Lock
- Replaces: 5003843AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2005 Jeep Wrangler | Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 2.4L L4, 2.5L L4, 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 4.0L L6, 6 Cyl 4.0 L GAS
View related parts
Jeep Wrangler Ignition Lock Cylinder, Black Part Number: 4746285
$116.70 MSRP: $174.00
You Save: $57.30 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Cylinder - Cylinder - Uncoded Black; Cylinder & Keys; Cylinder, Ignition Lock; Cylinder, Ignition
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1995 Jeep Wrangler | Base, Renegade, Rio Grande, S, SE, Sahara | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
Jeep Wrangler Ignition Lock Cylinder Part Number: 55026014
Product Specifications
- Other Name: Lock Cylinder - Set Ignition; Lock Cylinder; Cylinder & Keys; Cylinder, Ignition Lock
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987-1990 Jeep Wrangler | Base, Islander, Laredo, S, Sahara, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.2 L GAS
View related parts
Jeep Wrangler Ignition Lock Cylinder Part Number: 5161055AA
Product Specifications
- Other Name: None - Ignition Lock; Lock Cylinder; Cylinder & Keys
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1991-1993 Jeep Wrangler | Base, Islander, Renegade, S, Sahara | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

Jeep Wrangler Ignition Lock Cylinder

Choose OEM Ignition Lock Cylinder that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Ignition Lock Cylinder follows strict manufacturing steps to lock in quality and fit. If your Jeep Wrangler matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Wrangler parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Similarly, the main purpose of the Ignition Lock Cylinder in Jeep Wrangler vehicles is to enable the starter motor, which, when supplied with an appropriate key that is turned at the correct angle, will start the application's engine. This component is contained in the ignition switch system that provides the required circuits with battery power whenever the appropriate key is turned. Jeep Wrangler models manufactured in the past have employed standard and normal column-mounted ignition lock cylinder for purposes of increasing security and safety on the roads. In the past decades there have been improvements which have necessitated use of coded ignition keys that has a chip embedded with a computer that can only start the car engine when the correct key is inserted. However, it is still possible for the Ignition Lock Cylinder to suffer wear and malfunction and hence creates problems in starting the car. With present generations of Jeep Wrangler models, adoption of advanced keyless ignition systems makes a lot of sense due to less move parts compared to the ignition lock cylinders.

Jeep Wrangler Ignition Lock Cylinder Parts and Q&A

Ignition Lock Cylinder
5179511AA
Q: How to Service and Repair an Ignition Lock Cylinder on Jeep Wrangler?
A:
The first step in servicing or fixing the ignition lock cylinder is to access and take out the Steering Column Control Module (Sccm) from the steering column. After that, unscrew the screw on the lock cylinder housing and release the retainer fingers from the Skreem/Wcm before taking it off the ring. Turn the switch to Run with the key inside and use an appropriate tool to tap on the tab on the key cylinder through the slot in the housing. Carry the cylinder out by removing it and the key all together. Take off the Torx(R) Plus (five point) 30 bit screws securing the lock cylinder housing to the steering column and after that, remove the lock cylinder housing from the column. After this, remove the screw from the ignition module mount and pull it straight off the tabs that attach it to the lock cylinder housing.
Ignition Lock Cylinder
5083915AB
Q: How to Remove and Install the Ignition Lock Cylinder on Jeep Wrangler?
A:
An ignition key in the key cylinder is necessary to remove the ignition lock cylinder. Start by taking out the negative Battery Cable from the battery. To park an automatic transmission car, set the gear shift to the PARK position. Set the key to ON and you will see a small button near the base of the key cylinder. Insert a pin punch or small screwdriver through the lower cover's tang hole, pull the key cylinder out as you push the pin up. When installing, if your vehicle is automatic, set the shifter in PARK and then push the key cylinder into the Steering Column until it snaps into the ON position. Make sure the switch does what it is supposed to do; always lock the transmission lever in PARK after taking your key out for an automatic car. Should you find it tough to rotate the key or remove it, the shift lever-to-steering column cable might be damaged and require a replacement. Always ensure the key on a manual transmission isn't removable until the release lever has been pushed; if it can be removed without working the release lever, the steering column needs to be replaced. Reconnect the negative cable to the battery and make sure the switch is properly working.