How to Remove and Replace Exhaust Valve and Intake Valves on Jeep Wrangler?

Before removing and replacing the valve, ensure the cylinder head is off, then use the Valve Spring Compressor Tool C-3422-D together with the adapter 8464 to press the springs together. After that, open the bolts that hold the valve retaining locks in place and gently let go of the valve spring compressor. Following this step, get rid of the valve spring retainer, valve spring and valve stem seal. Before proceeding with the removal, remove all possible burrs from the valve stem lock grooves and always mark the valves to ensure you return each valve guide to its proper location.

How to Install Exhaust Valve and Intake Valves and Ensure Proper Spring Height on Jeep Wrangler?

First, put lubrication oil on the valve stems and lower them into the cylinder head after that. If the surfaces of the valve or seat have been polished again, measure the length of the valve stem; a long valve means the cylinder head should be replaced. Following the installation of new seals on the valve guides, insert the valve springs and valve retainers. Use your Valve Spring Compressor Tool MD-998772A and Adapter 6716A to squeeze the valve springs, place the locks and release the tool. Should the valves or seats be ground, measure the spring height from the spring seat base in the cylinder head up to the base of the spring retainer. When you have spacers, measure from the upper edge of each spacer. Whenever the height is more than 42.86 mm (1-11/16 inches), a 1.587 mm (1/16 inch) spacer should be added to the head counterbore to return its height to 41.27 to 42.86 mm (1-5/8 to 1-11/16 inches).

OEM Jeep Wrangler Intake Valve

Engine Intake Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Intake Valves found

View related parts
Jeep Wrangler Intake Valve Part Number: 5038331AB
$93.10 MSRP: $141.00
You Save: $47.90 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Intake; Valve Intake Standard Quantity Is Per Cylinder Head; Valve Intake Standard
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2024 Jeep Wrangler | Unlimited Rubicon 392 | 8 Cyl 6.4 L GAS
View related parts
Jeep Wrangler Intake Valve Part Number: 5047917AA
$13.62 MSRP: $20.30
You Save: $6.68 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Intake; Valve Intake Standard
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2025 Jeep Wrangler | 80th Anniversary, Freedom, Islander, Rubicon, Rubicon X, Sport, Sport S, Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited High Tide, Unlimited Islander, Unlimited Moab, Unlimited Rubicon, Unlimited Rubicon X, Unlimited Sahara, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Willys, Unlimited Willys Sport, Willys, Willys Sport | 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L MILD HYBRID EV-GAS (MHEV)
View related parts
Jeep Wrangler Intake Valve Part Number: 5184127AC
$24.74 MSRP: $36.70
You Save: $11.96 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Intake; Valve Intake Standard
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2017 Jeep Wrangler | 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S | 6 Cyl 3.6 L GAS
View related parts
Jeep Wrangler Intake Valve Part Number: 4781025AA
$37.05 MSRP: $54.30
You Save: $17.25 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Intake; Valves; Valve Intake Standard
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Jeep Wrangler | 70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X, X-S | 6 Cyl 3.8 L GAS
View related parts
Jeep Wrangler Intake Valve Part Number: 53010512AA
$22.22 MSRP: $39.05
You Save: $16.83 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Intake; Valves; Valve Intake Standard
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2006 Jeep Wrangler | 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
Jeep Wrangler Intake Valve Part Number: 68490016AA
$14.24 MSRP: $21.15
You Save: $6.91 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Engine Intake; Valves; Valve Engine Intake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2023 Jeep Wrangler | Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited Islander, Unlimited Rubicon, Unlimited Sahara, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Willys, Unlimited Willys Sport | 6 Cyl 3.0 L DIESEL
View related parts
Jeep Wrangler Intake Valve Part Number: 4884691AA
$26.23 MSRP: $33.60
You Save: $7.37 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Intake; Valves; Valve Intake Standard
- Replaces: 4667969AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Jeep Wrangler | SE | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Jeep Wrangler Intake Valve Part Number: 5048155AB
$12.06 MSRP: $17.55
You Save: $5.49 (32%)
Product Specifications
- Other Name: Valve - Intake; Valves; Valve Intake Standard
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2025 Jeep Wrangler | 80th Anniversary, Freedom, Islander, Rubicon, Rubicon X, Sport, Sport S, Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited High Altitude 4xe, Unlimited Islander, Unlimited Rubicon, Unlimited Rubicon 4xe, Unlimited Rubicon X, Unlimited Rubicon X 4xe, Unlimited Sahara, Unlimited Sahara 4xe, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Sport S 4xe, Unlimited Willys, Unlimited Willys 4xe, Unlimited Willys Sport, Willys, Willys Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Jeep Wrangler Intake Valve Part Number: 33003515
Product Specifications
- Other Name: Valve - Intake; Valves; Valve Intake Standard; Valve, Intake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-1999, 1987-1995 Jeep Wrangler | Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

Jeep Wrangler Intake Valve

Choose OEM Intake Valve that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Intake Valve follows strict manufacturing steps to lock in quality and fit. If your Jeep Wrangler matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Wrangler parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Intake Valve in the Jeep brand of automobiles especially Jeep Wrangler transports is a crucial unit that highly increases the rate of performance and efficiency of the vehicle's engine. Considered as one of the most dependable engines, the Intake Valve controls the administration of the time that air and fuel mixes in the engine so that the car can produce maximum power and fuel efficiency. Intake Valve should be replaced in time, because a damaged one can cause poor engine performance, and expensive repairs. Different styles of Intake Valves are also used in Jeep Wrangler models, the Vehicle Models include the two, and four-door hardtop basically for more space or traditional look. It also allows that the drivers of the different generations of Wrangler can maintain the efficiency and safety of their vehicles. Using parameters, the Intake Valve major function is not only performance but also the general wellbeing of the Jeep as it regulates the performance of an engine under diverse environments. For instance, the Jeep Wrangler's Intake Valve carries unique designing compared to other automobiles, which makes this kind of car highly durable and exceptional when it comes to its performance. Thus, models like new Wrangler 4xe which offer the opportunity to use a car with plug-in hybrid powertrain prove that Intake Valve still serves as one of the main approaches to meet new requirements in terms of efficiency. All in all, primarily, the Intake Valve remains a highly valued addition to the Jeep Wrangler line as it provides the maximum level of reliability together with performance and safety while driving.

Jeep Wrangler Intake Valve Parts and Q&A

Intake Valve
4781025AA
Q: How to Remove and Replace Exhaust Valve and Intake Valves on Jeep Wrangler?
A:
Before removing and replacing the valve, ensure the cylinder head is off, then use the Valve Spring Compressor Tool C-3422-D together with the adapter 8464 to press the springs together. After that, open the bolts that hold the valve retaining locks in place and gently let go of the valve spring compressor. Following this step, get rid of the valve spring retainer, valve spring and Valve Stem Seal. Before proceeding with the removal, remove all possible burrs from the valve stem lock grooves and always mark the valves to ensure you return each valve guide to its proper location.
Intake Valve
53010512AA
Q: How to Install Exhaust Valve and Intake Valves and Ensure Proper Spring Height on Jeep Wrangler?
A:
First, put lubrication oil on the valve stems and lower them into the cylinder head after that. If the surfaces of the valve or seat have been polished again, measure the length of the valve stem; a long valve means the cylinder head should be replaced. Following the installation of new seals on the valve guides, insert the valve springs and valve retainers. Use your Valve Spring Compressor Tool MD-998772A and Adapter 6716A to squeeze the valve springs, place the locks and release the tool. Should the valves or seats be ground, measure the spring height from the spring seat base in the cylinder head up to the base of the spring retainer. When you have spacers, measure from the upper edge of each spacer. Whenever the height is more than 42.86 mm (1-11/16 inches), a 1.587 mm (1/16 inch) spacer should be added to the head counterbore to return its height to 41.27 to 42.86 mm (1-5/8 to 1-11/16 inches).