How to Safely Remove a Front Wheel Stud Without Using a Hammer on Jeep Wrangler?

First, raise the car, support it and loosen the wheel assembly by removing it. After that, take out the brake caliper, the adapter and the rotor. Unbolt and then remove stud 2 from the hub using Remover C-4150-A.

How to Properly Service and Repair a Front Wheel Stud on Jeep Wrangler?

Insert the front wheel stud into the back side of the hub flange to service the stud. After that, set the washers onto the stud and secure the lug nut with the flat side facing the washers. Ensure the face of the nut is square when it is tight and it is properly seated inside the hub flange. Following that, get rid of the lug nut and the small pieces called washers. Go ahead and place the brake rotor, caliper adapter and caliper. After that, attach the tire and wheel to your vehicle and use a new lug nut on the studs that were changed. After that, take away the support and drop the vehicle to the ground.

OEM Jeep Wrangler Wheel Stud

Rim Wheel Stud

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Wheel Studs found

View related parts
Jeep Wrangler Wheel Stud, Front Part Number: 6036388AA
$7.60 MSRP: $11.30
You Save: $3.70 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt - Hub And Rotor; Wheel Lug Stud, Front; Wheel Bolt; Axle Shaft Bolt; Stud; Bolt Hub And Rotor; Wheel Lug Stud
- Position: Front
- Replaces: 53007463
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-1999 Jeep Wrangler | Sahara, SE, Sport | 2.5L L4, 4 Cyl 2.5 L GAS, 4.0L L6, 6 Cyl 4.0 L GAS
- 1987-1995 Jeep Wrangler | 2.5L L4, 4.0L L6, 4.2L L6
View related parts
Jeep Wrangler Wheel Stud, Front Part Number: 68003282AA
$10.27 MSRP: $14.75
You Save: $4.48 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt - Hub; Wheel Lug Stud, Front; Wheel Stud, 1/2-20; Wheel Bolt; Stud; Stud Hub; Wheel Lug Stud
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2017 Jeep Wrangler | 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
View related parts
Jeep Wrangler Wheel Stud, Front Part Number: 68325126AA
$15.66 MSRP: $23.00
You Save: $7.34 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stud - Hub; Wheel Lug Stud, Front; Stud Hub
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2025 Jeep Wrangler | 80th Anniversary, Freedom, Islander, Rubicon, Rubicon X, Sport, Sport S, Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited High Altitude 4xe, Unlimited High Tide, Unlimited Islander, Unlimited Moab, Unlimited Rubicon, Unlimited Rubicon 392, Unlimited Rubicon 4xe, Unlimited Rubicon X, Unlimited Rubicon X 4xe, Unlimited Sahara, Unlimited Sahara 4xe, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Sport S 4xe, Unlimited Willys, Unlimited Willys 4xe, Unlimited Willys Sport, Willys, Willys Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.4 L GAS
View related parts
Jeep Wrangler Stud, Rear Part Number: 4762841
$13.98 MSRP: $17.72
You Save: $3.74 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stud - Hub; Drive Axle Shaft Stud, Rear; Wheel Lug Stud; Wheel Bolt; Stud, Wheel; Stud Hub
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Jeep Wrangler | 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 6 Cyl 4.0 L GAS
View related parts
Jeep Wrangler Wheel Stud, Front Part Number: 6036482AA
Product Specifications
- Other Name: Bolt - Hub; Wheel Lug Stud, Front; Wheel Bolt; Stud; Stud Hub; Wheel Lug Stud
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2006 Jeep Wrangler | 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
Jeep Wrangler Axle Shaft Stud, Rear Part Number: 5011312AA
Product Specifications
- Other Name: Stud - Hub; Drive Axle Shaft Stud, Rear; Wheel Lug Stud; Stud; Stud Hub
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2002 Jeep Wrangler | SE, Sahara, Sport, X | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

Jeep Wrangler Wheel Stud

Choose OEM Wheel Stud that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Wheel Stud follows strict manufacturing steps to lock in quality and fit. If your Jeep Wrangler matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Wrangler parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Jeep Wrangler Wheel Stud Parts and Q&A

Wheel Stud, Front
68003282AA
Q:
How to Safely Remove a Front Wheel Stud Without Using a Hammer on Jeep Wrangler?
A:
First, raise the car, support it and loosen the wheel assembly by removing it. After that, take out the Brake Caliper, the adapter and the rotor. Unbolt and then remove stud 2 from the hub using Remover C-4150-A.
Fender Bolt, Front
6105096AA
Q:
How to Properly Service and Repair a Front Wheel Stud on Jeep Wrangler?
A:
Insert the front wheel stud into the back side of the hub flange to service the stud. After that, set the washers onto the stud and secure the lug nut with the flat side facing the washers. Ensure the face of the nut is square when it is tight and it is properly seated inside the hub flange. Following that, get rid of the lug nut and the small pieces called washers. Go ahead and place the Brake Rotor, caliper adapter and caliper. After that, attach the tire and wheel to your vehicle and use a new lug nut on the studs that were changed. After that, take away the support and drop the vehicle to the ground.