How to Service and Repair the Axle Shaft Seal and Wheel Bearing on 2000 Dodge Dakota?

First take out the axle shaft, then use the small pry bar to get the axle shaft seal out from the end of the axle shaft tube. Both the seal and the bearing can be removed together using the special tool. After that, extract the axle tubes from the axle shaft using Removal Tool C-4660-A and check the tube bore for any rough spots. Remove them if you find them. Change the axle shaft seal every time you reinstall it, don't try to reuse the old one. Wipe out the axle shaft tube bore which leads into the differential and then use Installer 5063 and Handle C-4171 to place the axle shaft bearing in place. Upon inspection, replace the axle shield seal using Installer 8402 and Handle C-4171 and then install the axle shaft again.

OEM 2000 Dodge Dakota Axle Shaft Seal

CV Axle Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Axle Shaft Seals found

View related parts
2000 Dodge Dakota Oil Seal, Rear Driver Side Part Number: 52070427AB
$27.81 MSRP: $40.85
You Save: $13.04 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Axle Drive Shaft; Drive Axle Shaft Seal, Rear, Rear Left, Rear Right; Wheel Seal; Axle Seal; Bearing Seal; Axle Seals; Wheel Bearing Seal; Differential Cover Seal; Rear Hub Seal.
- Position: Rear Driver Side
- Replaces: 52070427AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 0.8 x 3.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 52070427AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Dakota Submodels:
- Base, Big Horn, LE, Laramie, Lone Star, R/T, S, SE, SLT, SLT Plus, ST, SXT, Shelby, Sport, Sport Plus, TRX, TRX4, WS | 2.5L L4, 3.9L V6, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 4.7L V8, 5.9L V8, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Dakota Axle Seal, Front Driver Side Part Number: 52069706AB
$19.07 MSRP: $28.00
You Save: $8.93 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Axle Drive Shaft; Front Right/Left Drive Axle Shaft Seal; CV Intermediate Shaft Seal; Oil Seal Set; Bearing Seal; Axle Seals; Axle Shaft Seal; Intermed Shaft Seal; Ring; Seal; Seal Axle Drive Shaft; Drive Axle Shaft Seal
- Position: Front Driver Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 0.9 x 2.7 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52069706AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Dakota Submodels:
- Base, Big Horn, Laramie, Lone Star, R/T, SLT, SLT Plus, ST, SXT, Sport, Sport Plus, TRX, TRX4 | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Dakota Output Shaft Seal Part Number: 4798125
$30.04 MSRP: $44.80
You Save: $14.76 (33%)
ADD TO CART
Product Specifications
- Other Name: Seal - Output Shaft; Automatic Transmission Transfer Shaft Seal; Transfer Case Gasket; Multi-Purpose Seal; Oil Seal; Front Seal; Rear Extension Seal; Seal, Output, Front; Seal Output Shaft; Seal
- Item Weight: 0.50 Pounds
- Item Dimensions: 0.9 x 2.8 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4798125
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Dakota Submodels:
- Base, R/T, SLT, SXT, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS

2000 Dodge Dakota Axle Shaft Seal Parts and Q&A

Q: How to Service and Repair the Axle Shaft Seal and Wheel Bearing on 2000 Dodge Dakota?
A: First take out the axle shaft, then use the small pry bar to get the axle shaft seal out from the end of the axle shaft tube. Both the seal and the bearing can be removed together using the special tool. After that, extract the axle tubes from the axle shaft using Removal Tool C-4660-A and check the tube bore for any rough spots. Remove them if you find them. Change the axle shaft seal every time you reinstall it, don't try to reuse the old one. Wipe out the axle shaft tube bore which leads into the differential and then use Installer 5063 and Handle C-4171 to place the axle shaft bearing in place. Upon inspection, replace the axle shield seal using Installer 8402 and Handle C-4171 and then install the axle shaft again.