How to Safely Remove and Install a Cruise Control Switch in an Airbag System on 2000 Dodge Dakota?

The air bag system needs to be deactivated, so connect a negative battery cable to an uninsulated surface, wait two minutes, then start the installation. Before you remove the cruise control switch, unhook and isolate the negative battery cable and then remove the air bag module. Then, after taking out the switch-to-steering wheel screws, uninstall the switch and connect the electrical connector at the switch. After attachment, connect the electrical connector to the switch, put the switch into place and fix it with the screws at 1.5 Nm (14 in. lbs.) torque. After testing, remove the air bag module and reconnect it once more. Then, attach the negative battery cable back to the battery.

OEM 2000 Dodge Dakota Cruise Control Switch

Steering Wheel Cruise Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Cruise Control Switches found

View related parts
2000 Dodge Dakota Cruise Switch, Driver Side Part Number: 56021333AB
Product Specifications
- Other Name: Switch - Speed Control; Cruise Control Switch, Left; Engagement Switch; Switch; Switch Speed Control
- Position: Driver Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.1 x 3.0 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56021333AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Dakota Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport, Sport Plus | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Dakota Cruise Switch, Passenger Side Part Number: 56021332AB
Product Specifications
- Other Name: Switch - Speed Control; Cruise Control Switch, Right; Engagement Switch; Switch; Switch Speed Control
- Position: Passenger Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.1 x 3.0 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56021332AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Dakota Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport, Sport Plus | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2000 Dodge Dakota Cruise Control Switch Parts and Q&A

Q: How to Safely Remove and Install a Cruise Control Switch in an Airbag System on 2000 Dodge Dakota?
A: The air bag system needs to be deactivated, so connect a negative battery cable to an uninsulated surface, wait two minutes, then start the installation. Before you remove the cruise control switch, unhook and isolate the negative battery cable and then remove the air bag module. Then, after taking out the switch-to-steering wheel screws, uninstall the switch and connect the electrical connector at the switch. After attachment, connect the electrical connector to the switch, put the switch into place and fix it with the screws at 1.5 Nm (14 in. lbs.) torque. After testing, remove the air bag module and reconnect it once more. Then, attach the negative battery cable back to the battery.