JeepParts
My Garage
My Account
Cart
OEM 2000 Dodge Dakota Throttle Body
Fuel Injection Throttle Body- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Throttle Bodies found
2000 Dodge Dakota Throttle Body Part Number: 53013241AC
$378.72Ships in 1-2 Business DaysProduct Specifications- Replaces: 53013241AB
- Item Weight: 2.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53013241AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2000 Dodge Dakota Throttle Body Part Number: 53032691AA
Product Specifications- Replaces: 53030807AB, 53031733AA
- Item Weight: 3.40 Pounds
- Item Dimensions: 12.0 x 9.5 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032691AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2000 Dodge Dakota Throttle Body Part Number: 53031806AB
Product Specifications- Item Weight: 3.80 Pounds
- Item Dimensions: 12.0 x 9.4 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53031806AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2000 Dodge Dakota Throttle Body Parts and Q&A
- Q: How to Remove and Install a Throttle Body with Correct Adjustments and Connections on 2000 Dodge Dakota?A: The position of the throttle plate is mechanically set by a factory screw in the throttle body and keeping this screw-and the idle speed-at its original setting is important because the PCM controls all idle speed functions. Disconnect the air duct from the throttle body, then remove the connectors from the MAP sensor, IAC motor and TPS. Next, remove all cables from the throttle body arm and free the throttle body from the intake manifold. After this, throw out the old throttle body-to-intake manifold gasket. Wipe down the areas where the throttle body and intake manifold will meet, add a new gasket and put the throttle body onto the intake manifold for installation. Fasten the intake to the engine with four mounting bolts, tighten them to 11 Nm (100 in. lbs.) torque, then install the control cables and electrical connectors and restore the air duct at the throttle body.
Related 2000 Dodge Dakota Parts
2000 Dodge Dakota Fuel Pump
2000 Dodge Dakota Air Filter
2000 Dodge Dakota Fuel Injector
2000 Dodge Dakota Fuel Sending Unit
2000 Dodge Dakota Gas Cap
2000 Dodge Dakota Intake Manifold
2000 Dodge Dakota Cruise Control Switch
2000 Dodge Dakota Fuel Tank Strap
2000 Dodge Dakota Accelerator Cable
2000 Dodge Dakota Air Intake Coupling
2000 Dodge Dakota Fuel Filler Neck
2000 Dodge Dakota Throttle Cable