How to Remove and Install a Power Steering Pressure Switch on 2000 Dodge Dakota?

In order to take off the Power Steering Pressure Switch, one should disconnect the electrical connector and put a container below it. Carefully use a backup wrench to remove the switch. Installing the new switch; tighten to 14-22 Nm, reconnecting the electrical connector, fluid checking and adding, as necessary, and then start the engine.

OEM 2000 Dodge Dakota Power Steering Pressure Switch

Power Steering Oil Pressure Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Power Steering Pressure Switches found

View related parts
2000 Dodge Dakota Switch, Front Part Number: 56041335AC
$41.61 MSRP: $61.05
You Save: $19.44 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Power Steering; Power Steering Pressure Switch, Front
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 1.2 x 1.2 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041335AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Dakota Submodels:
- Base, R/T, SLT, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Dakota Pressure Switch, Front Part Number: 56027906AC
Product Specifications
- Other Name: Switch - Power Steering; Power Steering Pressure Switch, Front; Switch
- Position: Front
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.9 x 1.2 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56027906AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Dakota Submodels:
- Base, SLT, Sport | 4 Cyl 2.5 L GAS

2000 Dodge Dakota Power Steering Pressure Switch Parts and Q&A

Q: How to Remove and Install a Power Steering Pressure Switch on 2000 Dodge Dakota?
A: In order to take off the Power Steering Pressure Switch, one should disconnect the electrical connector and put a container below it. Carefully use a backup wrench to remove the switch. Installing the new switch; tighten to 14-22 Nm, reconnecting the electrical connector, fluid checking and adding, as necessary, and then start the engine.