How to Service and Install a Throttle Position Sensor on 2000 Dodge Dakota?

The Throttle Position Sensor (TPS) is maintained by taking off the air duct and disconnection of the electrical connector. Once the TPS screws are removed, fit the new TPS making sure that it can rotate slightly. Use 7 Nm screws, reconnect electrical connector, check bonding and reattach air duct.

OEM 2000 Dodge Dakota Throttle Position Sensor

TPS Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Throttle Position Sensors found

View related parts
2000 Dodge Dakota Throttle Position Sensor Part Number: 68433984AA
$102.36 MSRP: $156.00
You Save: $53.64 (35%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Throttle Position; Throttle Positionition Sensor; Throttle Sensor
- Replaces: 4874371AC
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.2 x 2.6 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68433984AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Dakota Submodels:
- Base, SLT, Sport | 2.5L L4
View related parts
2000 Dodge Dakota Throttle Position Sensor Part Number: 5017479AA
Product Specifications
- Other Name: Sensor - Throttle Position; Throttle Positionition Sensor; Throttle Sensor; Sensor Kit Throttle Position
- Replaces: 4882219
- Item Weight: 0.60 Pounds
- Item Dimensions: 1.9 x 2.7 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5017479AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Dakota Submodels:
- Base, Laramie, R/T, SLT, SLT Plus, ST, SXT, Sport, Sport Plus | 3.9L V6, 4 Cyl 2.5 L GAS, 4.7L V8, 5.2L V8, 5.9L V8, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2000 Dodge Dakota Throttle Position Sensor Parts and Q&A

Q: How to Service and Install a Throttle Position Sensor on 2000 Dodge Dakota?
A: The Throttle Position Sensor (TPS) is maintained by taking off the air duct and disconnection of the electrical connector. Once the TPS screws are removed, fit the new TPS making sure that it can rotate slightly. Use 7 Nm screws, reconnect electrical connector, check bonding and reattach air duct.