How to Service and Repair an Exhaust Heat Shield on 2000 Dodge Durango?

First, lift and sustain the vehicle to work on the heat shield. Take out the screws and nuts fastening the heat shields to the vehicle structure and floor pan after disconnecting the oxygen sensors which is crucial because the heat shield over the muffler must be taken off after you remove the muffler's front and rear holders. Slide the shield into place around the parts of the vehicle's exhaust system. For the installation process, fit the heat shields to the base or frame, add the screws and nuts and tighten them to no more than 7 Nm (60 inch lbs.). For the muffler hangers, use 23 Nm (200 inch lbs.). After all, bring down the car to the ground.

OEM 2000 Dodge Durango Exhaust Heat Shield

Heat Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Exhaust Heat Shields found

View related parts
2000 Dodge Durango Heat Shield, Driver Side Part Number: 53031706AG
$39.15 MSRP: $56.65
You Save: $17.50 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Exhaust Manifold; Exhaust Manifold Heat Shield, Left; Exhaust Heat Shield; Exhaust Manifold Heat Shield; Shield Exhaust Manifold
- Position: Driver Side
- Replaces: 53031706AB, 53031706AE
- Item Weight: 1.10 Pounds
- Item Dimensions: 16.3 x 4.5 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53031706AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Durango Submodels:
- Adventurer, Base, Limited, SLT, SLT Plus, ST, SXT, Sport | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2000 Dodge Durango Heat Shield, Passenger Side Part Number: 53030814AH
$39.90 MSRP: $58.75
You Save: $18.85 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Exhaust Manifold; Right Heat Shield; Floor Pan Heat Shield.; Shield Exhaust Manifold
- Position: Passenger Side
- Replaces: 53030814AB, 53030814AE, 53030814AG
- Item Weight: 1.20 Pounds
- Item Dimensions: 16.0 x 5.0 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53030814AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Durango Submodels:
- Adventurer, Base, Limited, SLT, SLT Plus, ST, SXT, Sport | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2000 Dodge Durango Heat Shield, Center Part Number: 55364165AA
$45.16 MSRP: $81.75
You Save: $36.59 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Exhaust; Floor Pan Heat Shield, Center, Center Rear, Rear; Exhaust Heat Shield; Shield Exhaust Front Pipe Or Converter; Shield Heat
- Position: Center
- Replaces: 55256724AC, 55256724AB
- Item Weight: 0.80 Pounds
- Item Dimensions: 18.6 x 10.6 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55364165AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Durango Heat Shield, Driver Side Part Number: 53031043AB
Product Specifications
- Other Name: Shield - Exhaust Manifold; Exhaust Manifold Heat Shield, Left; Exhaust Heat Shield; Shield Exhaust Manifold
- Position: Driver Side
- Item Weight: 0.60 Pounds
- Item Dimensions: 9.3 x 6.2 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53031043AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Durango Heat Shield, Passenger Side Part Number: 53031044AB
Product Specifications
- Other Name: Shield - Exhaust Manifold; Exhaust Manifold Heat Shield, Right; Exhaust Heat Shield; Shield Exhaust Manifold
- Position: Passenger Side
- Item Weight: 1.20 Pounds
- Item Dimensions: 18.8 x 4.9 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53031044AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2000 Dodge Durango Exhaust Heat Shield Parts and Q&A

Q: How to Service and Repair an Exhaust Heat Shield on 2000 Dodge Durango?
A: First, lift and sustain the vehicle to work on the heat shield. Take out the screws and nuts fastening the heat shields to the vehicle structure and floor pan after disconnecting the oxygen sensors which is crucial because the heat shield over the muffler must be taken off after you remove the muffler's front and rear holders. Slide the shield into place around the parts of the vehicle's exhaust system. For the installation process, fit the heat shields to the base or frame, add the screws and nuts and tighten them to no more than 7 Nm (60 inch lbs.). For the muffler hangers, use 23 Nm (200 inch lbs.). After all, bring down the car to the ground.