How to Locate, Remove, and Install an Intake Manifold Temperature Sensor on 2000 Dodge Durango?

You'll find the intake manifold temperature sensor on the front/side of the intake manifold. Remove the air duct at the throttle body, detach the sensor's electrical wire and lastly, pull out the sensor from the intake manifold. To install the sensor, fix it back into the intake manifold, turn on the torque wrench to 28 Nm (20 ft. lbs.) and hook up the electrical connector, then put the air duct back in place at the throttle body.

OEM 2000 Dodge Durango Intake Manifold Temperature Sensor

Air Intake Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Intake Manifold Temperature Sensor found

View related parts
2000 Dodge Durango Air Temperature Sensor Part Number: 56027872
$38.87 MSRP: $57.85
You Save: $18.98 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Temperature; Engine Intake Manifold Temperature Sensor; Intake Air Temperature Sensor; Air Intake Temperature Sensor; Temperature Sending Unit; Sensor Ambient Temperature; Sensor Air Temperature
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.9 x 2.6 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56027872
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2000 Dodge Durango Intake Manifold Temperature Sensor Parts and Q&A

Q: How to Locate, Remove, and Install an Intake Manifold Temperature Sensor on 2000 Dodge Durango?
A: You'll find the intake manifold temperature sensor on the front/side of the intake manifold. Remove the air duct at the throttle body, detach the sensor's electrical wire and lastly, pull out the sensor from the intake manifold. To install the sensor, fix it back into the intake manifold, turn on the torque wrench to 28 Nm (20 ft. lbs.) and hook up the electrical connector, then put the air duct back in place at the throttle body.