How to Remove and Install a MAP Sensor on the Throttle Body on 2000 Dodge Durango?

The MAP sensor sits on the front of the throttle body and is joined to it through an L-shaped rubber fitting. Remove the air duct from the throttle body first, then unscrew the two mounting bolts on the MAP sensor. While removing the MAP sensor, move the L-shaped rubber vacuum bump stop off the throttle body and take the entire bump stop off the sensor. For installation, connect the rubber fitting to the MAP sensor and position and hold the sensor in place against the throttle body. While keeping the rubber fitting over the throttle body vacuum nipple, tighten the bolts to 3 Nm (25 in. lbs.). The last step is to install the air duct at the throttle body.

OEM 2000 Dodge Durango MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 MAP Sensors found

View related parts
2000 Dodge Durango M.A.P. Sensor Part Number: 56041018
$169.95 MSRP: $253.00
You Save: $83.05 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.8 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041018
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Durango Submodels:
- Base, SLT, SLT Plus, Sport | 8 Cyl 4.7 L GAS
View related parts
2000 Dodge Durango M.A.P. Sensor Part Number: 56029405
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map See Note; Sensor Map; Pressure Sensor
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.8 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029405
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2000 Dodge Durango MAP Sensor Parts and Q&A

Q: How to Remove and Install a MAP Sensor on the Throttle Body on 2000 Dodge Durango?
A: The MAP sensor sits on the front of the throttle body and is joined to it through an L-shaped rubber fitting. Remove the air duct from the throttle body first, then unscrew the two mounting bolts on the MAP sensor. While removing the MAP sensor, move the L-shaped rubber vacuum bump stop off the throttle body and take the entire bump stop off the sensor. For installation, connect the rubber fitting to the MAP sensor and position and hold the sensor in place against the throttle body. While keeping the rubber fitting over the throttle body vacuum nipple, tighten the bolts to 3 Nm (25 in. lbs.). The last step is to install the air duct at the throttle body.