How to Replace the Throttle Position Sensor on the Throttle Body on 2000 Dodge Durango?

The Throttle Position Sensor (TPS) is removed by disconnection of electrical connector and screwing out two bolts. To install, be sure that the throttle shaft clips into the TPS socket, with a little turning. Secure the bolts by tightening it to 7 Nm, and ensure that there is no binding, reconnect the electrical connector and reattach the air duct.

OEM 2000 Dodge Durango Throttle Position Sensor

TPS Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Throttle Position Sensor found

View related parts
2000 Dodge Durango Throttle Position Sensor Part Number: 5017479AA
Product Specifications
- Other Name: Sensor - Throttle Position; Throttle Positionition Sensor; Throttle Sensor; Sensor Kit Throttle Position
- Replaces: 4882219
- Item Weight: 0.60 Pounds
- Item Dimensions: 1.9 x 2.7 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5017479AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Durango Submodels:
- Adventurer, Base, Limited, R/T, SLT, SLT Plus, ST, SXT, Sport | 3.9L V6, 4.7L V8, 5.2L V8, 5.9L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS

2000 Dodge Durango Throttle Position Sensor Parts and Q&A

Q: How to Replace the Throttle Position Sensor on the Throttle Body on 2000 Dodge Durango?
A: The Throttle Position Sensor (TPS) is removed by disconnection of electrical connector and screwing out two bolts. To install, be sure that the throttle shaft clips into the TPS socket, with a little turning. Secure the bolts by tightening it to 7 Nm, and ensure that there is no binding, reconnect the electrical connector and reattach the air duct.