How to Properly Remove and Install an Epoxy-Filled Ignition Coil on 2000 Dodge Durango?

Ignition coils are epoxy-filled parts, so you should use the same kind when you replace one. At the start, remove the primary power and secondary spark plug cable from the ignition coil. You should not remove the coil mounting bracket-to-cylinder head mounting bolts because they are under accessory drive belt tension; you should let all the belt tension go before you do so. After that, take out the two bolts to remove the ignition coil from its bracket. Fix the ignition coil to the coil bracket, tightening it 11 Nm (100 in. lbs.) with nuts or 5 Nm (50 in. lbs.) with coil mounting bolts. Finally, connect all wiring again to the ignition coil.

OEM 2000 Dodge Durango Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Coils found

View related parts
2000 Dodge Durango Ignition Coil Part Number: 56028172AC
$74.65 MSRP: $115.00
You Save: $40.35 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Coil
- Replaces: 56028172AB
- Item Weight: 1.40 Pounds
- Item Dimensions: 2.9 x 4.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028172AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Durango Ignition Coil Part Number: 56028138AF
$83.96 MSRP: $126.00
You Save: $42.04 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil; Coil On Plug Coil; Ignition Coil Set; Coil Ignition
- Replaces: 56028138AD, 56028138AB, 56028138AE
- Item Weight: 0.90 Pounds
- Item Dimensions: 1.6 x 3.3 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028138AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Durango Submodels:
- Adventurer, Base, Limited, SLT, SLT Plus, ST, SXT, Sport | 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

2000 Dodge Durango Ignition Coil Parts and Q&A

Q: How to Properly Remove and Install an Epoxy-Filled Ignition Coil on 2000 Dodge Durango?
A: Ignition coils are epoxy-filled parts, so you should use the same kind when you replace one. At the start, remove the primary power and secondary spark plug cable from the ignition coil. You should not remove the coil mounting bracket-to-cylinder head mounting bolts because they are under accessory drive belt tension; you should let all the belt tension go before you do so. After that, take out the two bolts to remove the ignition coil from its bracket. Fix the ignition coil to the coil bracket, tightening it 11 Nm (100 in. lbs.) with nuts or 5 Nm (50 in. lbs.) with coil mounting bolts. Finally, connect all wiring again to the ignition coil.