JeepParts
My Garage
My Account
Cart
OEM 2001 Dodge Durango Rack And Pinion
Steering Rack And Pinion- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Rack And Pinions found
2001 Dodge Durango Steering Gear Part Number: 52106405AO
$737.81 MSRP: $1075.00You Save: $337.19 (32%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Gear - Rack And Pinion; Steering Gearbox; Steering Gear Assembly
- Replaced by: 52106405AP
- Item Weight: 25.50 Pounds
- Item Dimensions: 61.5 x 10.6 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52106405AO
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2001 Dodge Durango Steering Gear Part Number: 52106477AJ
Product Specifications- Other Name: Gear - Rack And Pinion; Rack and Pinion Assembly; Steering Gearbox; Gear Assembly; Steering Gear Assembly
- Replaces: 52106477AG, 52106477AI, 52106477AD, 52106477AC, 52106477AE, 52106477AF, 52106477AB, 52106477AH
- Item Weight: 24.90 Pounds
- Item Dimensions: 62.0 x 10.2 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52106477AJ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2001 Dodge Durango Gear Assembly Part Number: 52106405AP
Product Specifications- Other Name: Gear - Rack And Pinion; Rack and Pinion Assembly
- Replaces: 52106405AG, 52106405AJ, 52106405AE, 52106405AM, 52106405AD, 52106405AH, 52106405AN, 52106405AF, 52106405AK, 52106405AI, 52106405AO, 52106405AC
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52106405AP
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2001 Dodge Durango Rack And Pinion Parts and Q&A
- Q: How to Service and Repair a Rack and Pinion Steering System on 2001 Dodge Durango?A: To begin with, raise and support the vehicle. After removing the nuts on the tie rod ends, grab your Puller C-3894-A to separate them from the knuckles. After that, separate the power steering lines from the rack and pinion, take out the lower coupler bolt and move the coupler away from the rack and pinion. When the mounting bolts are removed from the front crossmember, take the rack and pinion out. Check the bushings for damage or wear before installing the new rack and pinion and change any that look bad. Fix the unit into place on the front crossmember and turn the mounting bolts to 258 Nm (190 ft. lbs.). Slide the shaft coupler on the rack and pinion, add a new bolt, then tighten it to 49 Nm (36 ft. lbs.). After cleaning the studs and tapers, attach the tie rod ends to the steering knuckles, tighten their nuts to 108 Nm (80 ft. lbs.) and move on. Attach the power steering hoses to the rack and pinion, remove the support and lower your vehicle. After that, add fluid to your power steering and adjust the alignment toe position.
Related 2001 Dodge Durango Parts
2001 Dodge Durango Steering Wheel
2001 Dodge Durango Power Steering Pump
2001 Dodge Durango Steering Column
2001 Dodge Durango Steering Shaft
2001 Dodge Durango Drag Link
2001 Dodge Durango Power Steering Cooler
2001 Dodge Durango Power Steering Hose
2001 Dodge Durango Rack & Pinion Bushing
2001 Dodge Durango Rack and Pinion Boot
2001 Dodge Durango Steering Gear Box
2001 Dodge Durango Tie Rod Bushing
2001 Dodge Durango Tie Rod End