How to Remove and Install a Throttle Body Without Altering Engine Idle Speed on 2000 Dodge Durango?

The throttle body has a set screw which is used to limit the throttle plate position; do not adjust idle speed with it, it is the PCM that does this. To remove the throttle body, disconnect air duct, disconnect sensors, remove vacuum line and cables, unbolt and replace gasket and then re-install.

OEM 2000 Dodge Durango Throttle Body

Fuel Injection Throttle Body

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Throttle Bodies found

View related parts
2000 Dodge Durango Throttle Body Part Number: 53013241AC
$378.72
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 53013241AB
- Item Weight: 2.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53013241AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Dodge Durango Submodels:
- Base, SLT, SLT Plus, Sport | 8 Cyl 4.7 L GAS
View related parts
2000 Dodge Durango Throttle Body Part Number: 53032691AA
Product Specifications
- Replaces: 53030807AB, 53031733AA
- Item Weight: 3.40 Pounds
- Item Dimensions: 12.0 x 9.5 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032691AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 5.2L V8, 5.9L V8, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2000 Dodge Durango Throttle Body Parts and Q&A

Q: How to Remove and Install a Throttle Body Without Altering Engine Idle Speed on 2000 Dodge Durango?
A: The throttle body has a set screw which is used to limit the throttle plate position; do not adjust idle speed with it, it is the PCM that does this. To remove the throttle body, disconnect air duct, disconnect sensors, remove vacuum line and cables, unbolt and replace gasket and then re-install.