How to Service and Repair a Front Engine Mount on 2000 Dodge Ram 1500?

Before you begin, pull the negative cable out of the car battery, move the fan position to make room for the radiator top tank and hose and do not lift the engine using the intake manifold. First, place the engine support fixture on the engine mounts and then hoist the vehicle. Once the engine is slightly lifted, unscrew the thru-bolt and nut position and the engine bracket/cushion bolts. With the nuts out, also unscrew the bracket and heat shields. To install the engine, when it has been raised slightly, fit the engine support bracket/cushion and heat shields to the engine block using new bolts, but tighten them to 81 Nm (60 ft. lbs.) torque. Then, put the through-bolt in the engine support bracket/cushion, lower the engine on the support fixture and use it to guide the engine bracket/cushion and through-bolt into the support bracket and finally, secure the nuts so they are tightened to 102 Nm (75 ft.lbs.). After that, bring the vehicle back to the ground and unhook the lifting fixture.

OEM 2000 Dodge Ram 1500 Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Engine Mounts found

View related parts
2000 Dodge Ram 1500 Rear Mount Part Number: 52058217
$8.60 MSRP: $10.90
You Save: $2.30 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator; Engine Mount Bracket; Transmission Mount; Motor Mount; Mount; Insulator Assembly, Rear Support; Insulator Engine Mount
- Item Weight: 3.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52058217
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Dodge Ram 1500 Submodels:
- Base, LT, Laramie, ST, Sport, WS | 6 Cyl 3.9 L GAS
View related parts
2000 Dodge Ram 1500 Rear Mount Part Number: 52058218
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount Bracket; Motor Mount; Mount; Insulator Engine Mount Rear Transmission Support; Insulator Engine Mount
- Item Weight: 4.70 Pounds
- Item Dimensions: 9.0 x 3.9 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52058218
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 1500 Submodels:
- LT, Laramie, SLT, SS/T 5.9L, ST, Sport | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Ram 1500 Motor Mount Part Number: 52020228AB
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount Bracket; Front Mount; Mount; Insulator Engine Mount
- Replaces: 52020228
- Item Weight: 6.70 Pounds
- Item Dimensions: 8.4 x 5.6 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52020228AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 1500 Submodels:
- Base, LT, Laramie, SLT, ST, Sport, WS | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Ram 1500 Motor Mount Part Number: 52020327AB
Product Specifications
- Other Name: Insulator; Engine Mount Bracket; Front Mount; Insulator Engine Mount
- Item Weight: 6.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52020327AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Dodge Ram 1500 Submodels:
- LT, Laramie, SLT, SS/T 5.9L, ST, Sport | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Ram 1500 Motor Mount Part Number: 52020326AB
Product Specifications
- Other Name: Insulator Engine Mount; Engine Mount Bracket; Front Mount
- Item Weight: 6.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52020326AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Dodge Ram 1500 Submodels:
- LT, Laramie, SLT, SS/T 5.9L, ST, Sport | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Ram 1500 Motor Mount Part Number: 52020229AB
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount Bracket; Front Mount; Mount; Insulator Engine Mount
- Replaces: 52020229
- Item Weight: 4.00 Pounds
- Item Dimensions: 10.2 x 10.4 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52020229AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 1500 Submodels:
- Base, LT, Laramie, SLT, ST, Sport, WS | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Ram 1500 Rear Mount Part Number: 52020251AA
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount Bracket; Motor Mount; Mount; Insulator Engine Mount Rear Transmission Support; Insulator Engine Mount
- Item Weight: 3.30 Pounds
- Item Dimensions: 8.9 x 3.0 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52020251AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 1500 Submodels:
- Base, LT, Laramie, SLT, SS/T 5.9L, ST, Sport | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2000 Dodge Ram 1500 Engine Mount Parts and Q&A

Q: How to Service and Repair a Front Engine Mount on 2000 Dodge Ram 1500?
A: Before you begin, pull the negative cable out of the car battery, move the fan position to make room for the radiator top tank and hose and do not lift the engine using the intake manifold. First, place the engine support fixture on the engine mounts and then hoist the vehicle. Once the engine is slightly lifted, unscrew the thru-bolt and nut position and the engine bracket/cushion bolts. With the nuts out, also unscrew the bracket and heat shields. To install the engine, when it has been raised slightly, fit the engine support bracket/cushion and heat shields to the engine block using new bolts, but tighten them to 81 Nm (60 ft. lbs.) torque. Then, put the through-bolt in the engine support bracket/cushion, lower the engine on the support fixture and use it to guide the engine bracket/cushion and through-bolt into the support bracket and finally, secure the nuts so they are tightened to 102 Nm (75 ft.lbs.). After that, bring the vehicle back to the ground and unhook the lifting fixture.