How to Service and Repair the Control Arm in the Upper Suspension on 2000 Dodge Ram 3500?

Raise and secure the vehicle first and after that take off the tire assembly. Set up a wide, flat jack stand under the lower suspension arm at the outboard position to support it. Remove the ball joint cotter pin and nut next and release the ball joint from the knuckle with remover MB-990635. Remove both of the pivot bar bolts from the upper suspension arm bracket and then take the arm out. During installation, put the upper suspension arm on the strut and close the pivot bar bolts with a torque reading of 169 Nm (125 ft. lbs.). Put the ball joint into the knuckle, fit the ball joint nut and tighten it to 81 Nm (60 ft. lbs.) and add a replacement cotter pin. Take the jack out from the lower suspension arm, put on the tire and wheel, unsupport the vehicle and lower it all down. Finally, set the front suspension so it matches the instructions.

OEM 2000 Dodge Ram 3500 Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Control Arms found

View related parts
2000 Dodge Ram 3500 Upper Control Arm Part Number: 52106799AA
$170.42 MSRP: $216.04
You Save: $45.62 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Control; Suspension Control Arm; Control Arm; Upper Arm; Arm Control
- Item Weight: 5.40 Pounds
- Item Dimensions: 2.4 x 2.9 x 20.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52106799AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 3500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Ram 3500 Lower Control Arm Part Number: 52113678AA
Product Specifications
- Other Name: Arm - Lower Control; Suspension Control Arm and Ball Joint Assembly; Control Arm Assembly; Control Arm; Arm Lower Control Front
- Position: Lower
- Item Weight: 32.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52113678AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 3500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Ram 3500 Lower Control Arm Part Number: 52106778AA
Product Specifications
- Other Name: Arm - Control; Suspension Control Arm; Control Arm; Lower Arm; Arm Control
- Item Weight: 6.50 Pounds
- Item Dimensions: 2.7 x 3.4 x 23.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52106778AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 3500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Ram 3500 Upper Control Arm Part Number: 52106678AA
Product Specifications
- Other Name: Arm - Upper Control; Suspension Control Arm and Ball Joint Assembly.; Arm Upper Control Front
- Position: Upper
- Item Weight: 11.70 Pounds
- Item Dimensions: 16.9 x 15.0 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 52106678AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 3500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS

2000 Dodge Ram 3500 Control Arm Parts and Q&A

Q: How to Service and Repair the Control Arm in the Upper Suspension on 2000 Dodge Ram 3500?
A: Raise and secure the vehicle first and after that take off the tire assembly. Set up a wide, flat jack stand under the lower suspension arm at the outboard position to support it. Remove the ball joint cotter pin and nut next and release the ball joint from the knuckle with remover MB-990635. Remove both of the pivot bar bolts from the upper suspension arm bracket and then take the arm out. During installation, put the upper suspension arm on the strut and close the pivot bar bolts with a torque reading of 169 Nm (125 ft. lbs.). Put the ball joint into the knuckle, fit the ball joint nut and tighten it to 81 Nm (60 ft. lbs.) and add a replacement cotter pin. Take the jack out from the lower suspension arm, put on the tire and wheel, unsupport the vehicle and lower it all down. Finally, set the front suspension so it matches the instructions.