Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2000 Dodge Ram 3500 Steering Knuckle

Front Steering Knuckle
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Steering Knuckles found

  • 2000 Dodge Ram 3500 Steering Knuckle - 5015238AA
    2000 Dodge Ram 3500 Steering Knuckle Diagram - 5015238AA
    View related parts

    2000 Dodge Ram 3500 Knuckle, Front Passenger Side Part Number: 5015238AA

    Product Specifications
    • Other Name: Knuckle - Front; Steering Knuckle, Front Right; Knuckle Front
    • Position: Front Passenger Side
    • Item Weight: 19.10 Pounds
    • Item Dimensions: 14.3 x 14.5 x 7.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5015238AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2000 Dodge Ram 3500 Submodels:
    • Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
  • 2000 Dodge Ram 3500 Steering Knuckle - 5015239AA
    2000 Dodge Ram 3500 Steering Knuckle Diagram - 5015239AA
    View related parts

    2000 Dodge Ram 3500 Knuckle, Front Driver Side Part Number: 5015239AA

    Product Specifications
    • Other Name: Knuckle - Front; Steering Knuckle, Front Left; Knuckle Front
    • Position: Front Driver Side
    • Item Weight: 2.20 Pounds
    • Item Dimensions: 14.6 x 14.3 x 7.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5015239AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2000 Dodge Ram 3500 Submodels:
    • Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
  • 2000 Dodge Ram 3500 Steering Knuckle - 52038658
    2000 Dodge Ram 3500 Steering Knuckle Diagram - 52038658
    View related parts

    2000 Dodge Ram 3500 Shackle Bracket, Front Passenger Side Part Number: 52038658

    Product Specifications
    • Other Name: Knuckle - Front; Steering Knuckle, Front Right; Knuckle; Knuckle Front
    • Position: Front Passenger Side
    • Item Weight: 20.60 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 52038658
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2000 Dodge Ram 3500 Submodels:
    • Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS

2000 Dodge Ram 3500 Steering Knuckle Parts and Q&A

  • Q: How to Service and Repair a Steering Knuckle on 2000 Dodge Ram 3500?
    A: To work on the steering knuckle, lift and support the vehicle, then take off the wheel and tire unit. Following this, get rid of the brake caliper and rotor. First, remove the cotter pin and nut from the tie-rod end and use Puller C-3894-A to detach the tie rod end from the knuckle. Following this, remove the cotter pins and the nuts from the upper and lower ball joints, unhitch the upper joint from the knuckle using remover AID-990635 and release the lower joint with remover C-4150A, before taking out the knuckle. To mount the knuckle, set it onto the ball joints, affix the lower ball joint nuts, tighten the nut on the top ball joint to 81 Nm (60 ft. lbs.) and install the cotter pin. After tightening the lower ball joint nut to 129 Nm (95 ft. lbs.) on LD or 149 Nm (110 ft. lbs.) on HD, then install the cotter pin. Put the tie rod end back onto the steering knuckle, fix the nut with 108 Nm (80 ft. lbs.) and insert the cotter pin. The last step is to put on the brake rotor and caliper, then the wheel and tire assembly and lower the car after removing the support.

Related 2000 Dodge Ram 3500 Parts

Alternate Year Models

+
1999 Dodge Ram 3500 Steering Knuckle 2001 Dodge Ram 3500 Steering Knuckle