How to Replace the A/C Switch in a Heater Control Assembly on 2000 Dodge Viper?

To replace the A/C switch, remove the instrument panel center bezel and disconnect related wire connectors. Remove knee blockers, headlamp switch knob and steering column shroud. Remove screws from control assembly, disconnect wire connectors, vacuum lines, and temperature control cable and install new switch by reversing steps.

OEM 2000 Dodge Viper A/C Switch

Air Conditioning Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 A/C Switch found

View related parts
2000 Dodge Viper Control Assembly Part Number: 5245298
Product Specifications
- Other Name: Control - A/C And Heater; Climate Control Module; Dash Control Unit; Control A/C And Heater; Gauge, Temperature
- Item Weight: 1.30 Pounds
- Item Dimensions: 10.1 x 3.8 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5245298
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Viper Submodels:
- ACR, GT2, GTS, R/T-10 | 10 Cyl 8.0 L GAS

2000 Dodge Viper A/C Switch Parts and Q&A

Q: How to Replace the A/C Switch in a Heater Control Assembly on 2000 Dodge Viper?
A: To replace the A/C switch, remove the instrument panel center bezel and disconnect related wire connectors. Remove knee blockers, headlamp switch knob and steering column shroud. Remove screws from control assembly, disconnect wire connectors, vacuum lines, and temperature control cable and install new switch by reversing steps.