How to Maintain a Blower Motor on 2000 Dodge Viper?

To service the front blower motor, disconnect the battery negative cable, remove the cowl air inlet and blower housing screws, and disconnect the wiring. Remove the blower motor assembly and cooling tube, then lift out the motor. Transfer the blower motor wheel to the new motor and reverse the steps for installation.

OEM 2000 Dodge Viper Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor found

View related parts
2000 Dodge Viper Blower Motor Part Number: 4848021
Product Specifications
- Other Name: Wheel; Blower Assembly; Motor, W/Scroll, Blower; Blower
- Item Weight: 8.10 Pounds
- Item Dimensions: 17.0 x 15.2 x 10.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4848021
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Viper Submodels:
- ACR, GT2, GTS, R/T-10 | 10 Cyl 8.0 L GAS

2000 Dodge Viper Blower Motor Parts and Q&A

Q: How to Maintain a Blower Motor on 2000 Dodge Viper?
A: To service the front blower motor, disconnect the battery negative cable, remove the cowl air inlet and blower housing screws, and disconnect the wiring. Remove the blower motor assembly and cooling tube, then lift out the motor. Transfer the blower motor wheel to the new motor and reverse the steps for installation.