How to Locate and Replace a Coolant Temperature Sensor on 2000 Dodge Viper?

Driver side cylinder head has engine coolant temperature sensor. To remove it, empty the cooling system, disconnect the electrical connector and remove the sensor. For installation purposes, tighten the new sensor to 27 Nm (20 ft. lbs.), reconnect the connector, and refill the cooling system.

OEM 2000 Dodge Viper Coolant Temperature Sensor

Coolant Water Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Temperature Sensor found

View related parts
2000 Dodge Viper Coolant Temperature Sensor Part Number: 4848110
Product Specifications
- Other Name: Sensor - Temperature Gauge; Sending Unit Temperature Gauge
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.8 x 1.4 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4848110
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Viper Submodels:
- ACR, GT2, GTS, R/T-10 | 10 Cyl 8.0 L GAS

2000 Dodge Viper Coolant Temperature Sensor Parts and Q&A

Q: How to Locate and Replace a Coolant Temperature Sensor on 2000 Dodge Viper?
A: Driver side cylinder head has engine coolant temperature sensor. To remove it, empty the cooling system, disconnect the electrical connector and remove the sensor. For installation purposes, tighten the new sensor to 27 Nm (20 ft. lbs.), reconnect the connector, and refill the cooling system.