How to Service and Repair a Headlight Switch on 2000 Dodge Viper?

In order to service the headlamp switch, remove the knee blocker, followed by the switch knob with a tool for unlocking the lock tab. Next remove instrument panel bezel and steering column shroud. Finally, take the headlamp switch off the switch and reconnect the wire. Follow the steps backwards for installation.

OEM 2000 Dodge Viper Headlight Switch

Headlamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Headlight Switches found

View related parts
2000 Dodge Viper Headlamp Switch Part Number: 4763135
Product Specifications
- Other Name: Switch - Headlamp; Switch, Headlamp And Dome Lamp; Switch, Headlamp; Switch Headlamp
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.7 x 3.4 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4763135
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Viper Submodels:
- ACR, GT2, GTS, R/T-10 | 10 Cyl 8.0 L GAS
View related parts
2000 Dodge Viper Ignition Switch Part Number: 4728424
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Housing; Windshield Washer Switch.; Turn Signal Switch; Multifunction, Wiper, Headlamp Dimmer, Hazard, Signal & Tilt options.
- Item Weight: 1.40 Pounds
- Item Dimensions: 8.7 x 5.3 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4728424
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Viper Submodels:
- ACR, GT2, GTS, R/T-10 | 10 Cyl 8.0 L GAS

2000 Dodge Viper Headlight Switch Parts and Q&A

Q: How to Service and Repair a Headlight Switch on 2000 Dodge Viper?
A: In order to service the headlamp switch, remove the knee blocker, followed by the switch knob with a tool for unlocking the lock tab. Next remove instrument panel bezel and steering column shroud. Finally, take the headlamp switch off the switch and reconnect the wire. Follow the steps backwards for installation.