How to Remove and Install an Ignition Coil on 2000 Dodge Viper?

The system has two coil packs, each containing epoxy and placed behind the engine on a bracket. The left coil pack manages three coils firing cylinders 1, 2, 3, 4, 6 and 7. The right coil pack is responsible for 2 coils and ignites cylinders 5, 8, 9 and 10. Open the cowl cover, detach the electrical connector from the coil and remove the screws that are holding the pack in place. Swap the spark plug cables one at a time from the old coil pack to the same terminals on the new one. To install, set the coil pack into place, fasten its bolts to 11 Nm (95 in. lbs.) torque, attach the electrical cable and put the cowl cover back on.

OEM 2000 Dodge Viper Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Coils found

View related parts
2000 Dodge Viper Ignition Coil Part Number: 56032521AC
$159.45 MSRP: $243.00
You Save: $83.55 (35%)
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil; Coil On Plug Coil
- Replaces: 56032521AB
- Item Weight: 2.50 Pounds
- Item Dimensions: 6.8 x 4.8 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56032521AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Viper Submodels:
- ACR, GT2, GTS, R/T-10, SRT-10 | 10 Cyl 8.0 L GAS, 10 Cyl 8.3 L GAS
View related parts
2000 Dodge Viper Ignition Coil Part Number: 56029098AB
$88.04 MSRP: $195.00
You Save: $106.96 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil
- Replaces: 56029098AA
- Item Weight: 3.30 Pounds
- Item Dimensions: 3.0 x 5.5 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029098AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Viper Submodels:
- ACR, GT2, GTS, R/T-10, SRT-10 | 10 Cyl 8.0 L GAS, 10 Cyl 8.3 L GAS

2000 Dodge Viper Ignition Coil Parts and Q&A

Q: How to Remove and Install an Ignition Coil on 2000 Dodge Viper?
A: The system has two coil packs, each containing epoxy and placed behind the engine on a bracket. The left coil pack manages three coils firing cylinders 1, 2, 3, 4, 6 and 7. The right coil pack is responsible for 2 coils and ignites cylinders 5, 8, 9 and 10. Open the cowl cover, detach the electrical connector from the coil and remove the screws that are holding the pack in place. Swap the spark plug cables one at a time from the old coil pack to the same terminals on the new one. To install, set the coil pack into place, fasten its bolts to 11 Nm (95 in. lbs.) torque, attach the electrical cable and put the cowl cover back on.