How to Replace a Dimmer Switch Without Damaging the Instrument Panel Bezel on 2000 Dodge Viper?

When switching out a panel dimmer switch, use a thin flat blade tool so that you do not damage the bezel on the instrument panel. As you press down at the top and bottom of the switch, rock it out from the bezel. While you're installing, check that wires aren't compressed and push the switch into the instrument panel bezel until it fits and locks.

OEM 2000 Dodge Viper Dimmer Switch

Light Dimmer Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Dimmer Switch found

View related parts
2000 Dodge Viper Ignition Switch Part Number: 4728424
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Housing; Windshield Washer Switch.; Turn Signal Switch; Multifunction, Wiper, Headlamp Dimmer, Hazard, Signal & Tilt options.
- Item Weight: 1.40 Pounds
- Item Dimensions: 8.7 x 5.3 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4728424
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Viper Submodels:
- ACR, GT2, GTS, R/T-10 | 10 Cyl 8.0 L GAS

2000 Dodge Viper Dimmer Switch Parts and Q&A

Q: How to Replace a Dimmer Switch Without Damaging the Instrument Panel Bezel on 2000 Dodge Viper?
A: When switching out a panel dimmer switch, use a thin flat blade tool so that you do not damage the bezel on the instrument panel. As you press down at the top and bottom of the switch, rock it out from the bezel. While you're installing, check that wires aren't compressed and push the switch into the instrument panel bezel until it fits and locks.