How to Locate, Remove, and Install a Speed Sensor on 2000 Jeep Cherokee?

The Vehicle Speed Sensor is fitted to the side of the transmission's extension housing, above the left-side speedometer pinion gear adapter. The best way to remove the sensor is to raise and prop up the vehicle first. From the back, press the slide tab to separate the connector from the sensor and now push the secondary release lock on the side and pull the connector off. After that, unscrew the sensor mounting bolt and carefully pull the sensor straight out from the speedometer pinion gear adapter, making sure not to take the gear adapter off the transmission. Start by cleaning the inside of the speedometer pinion gear adapter before putting in the sensor. Place the sensor into the adapter and make sure it is secure by tightening the mounting bolt. Screw the sensor mounting bolt to 2.2 Nm (20 in. lbs.) and secure the electrical connector again to the sensor.

OEM 2000 Jeep Cherokee Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Speed Sensors found

View related parts
2000 Jeep Cherokee Vehicle Speed Sensor Part Number: 56027905
Product Specifications
- Other Name: Sensor - Vehicle Speed; Sensor Vehicle Speed
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.6 x 1.5 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56027905
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Cherokee Submodels:
- Classic, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2000 Jeep Cherokee ABS Sensor Part Number: 56005217AB
Product Specifications
- Other Name: Sensor - Anti-Lock Brakes; ABS Wheel Speed Sensor
- Item Weight: 0.70 Pounds
- Item Dimensions: 9.5 x 7.4 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56005217AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Cherokee Submodels:
- Classic, Country, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2000 Jeep Cherokee ABS Sensor Part Number: 52005933AB
Product Specifications
- Other Name: Sensor - Anti-Lock Brakes; Anti-Lock Braking System Sensor; ABS Wheel Speed Sensor; Rear Speed Sensor
- Replaces: 52005933
- Item Weight: 0.50 Pounds
- Item Dimensions: 53.8 x 1.6 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52005933AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Cherokee Submodels:
- Classic, Country, Limited, SE, Sport | 2.1L L4, 2.5L L4, 4 Cyl 2.5 L GAS, 4.0L L6, 6 Cyl 4.0 L GAS
View related parts
2000 Jeep Cherokee ABS Sensor Part Number: 52005932AB
Product Specifications
- Other Name: Sensor - Anti-Lock Brakes; Rear Speed Sensor
- Replaces: 52005932
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52005932AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Cherokee Submodels:
- Classic, Country, Limited, SE, Sport | 2.1L L4, 2.5L L4, 4 Cyl 2.5 L GAS, 4.0L L6, 6 Cyl 4.0 L GAS

2000 Jeep Cherokee Speed Sensor Parts and Q&A

Q: How to Locate, Remove, and Install a Speed Sensor on 2000 Jeep Cherokee?
A: The Vehicle Speed Sensor is fitted to the side of the transmission's extension housing, above the left-side speedometer pinion gear adapter. The best way to remove the sensor is to raise and prop up the vehicle first. From the back, press the slide tab to separate the connector from the sensor and now push the secondary release lock on the side and pull the connector off. After that, unscrew the sensor mounting bolt and carefully pull the sensor straight out from the speedometer pinion gear adapter, making sure not to take the gear adapter off the transmission. Start by cleaning the inside of the speedometer pinion gear adapter before putting in the sensor. Place the sensor into the adapter and make sure it is secure by tightening the mounting bolt. Screw the sensor mounting bolt to 2.2 Nm (20 in. lbs.) and secure the electrical connector again to the sensor.