How to Service and Repair the ABS Control Module for Antilock Brakes on 2000 Jeep Cherokee?

To repair the Hydraulic Control Assembly for Antilock Brakes, remove the pump motor connector from the CAB and remove the mounting screws from the HCU and finally remove the CAB from the HCU. Attach the CAB onto the HCU, tighten the CAB mounting screws to 1.5 Nm (16 inch lbs.) and after that, plug back in the pump motor to the CAB.

OEM 2000 Jeep Cherokee ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 ABS Control Modules found

View related parts
2000 Jeep Cherokee Control Module Part Number: 56027931AC
Product Specifications
- Other Name: Module - ABS; ABS Control Module; ABS Control Unit; Module Anti-Lock Brakes
- Item Weight: 1.80 Pounds
- Item Dimensions: 6.0 x 5.0 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56027931AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Cherokee Submodels:
- Classic, Country, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2000 Jeep Cherokee Hydraulic Unit Part Number: 52128138AE
Product Specifications
- Other Name: Control U - Anti-Lock Brake; ABS Pump And Motor Assembly; ABS Control Module; ABS Pump Assembly; Control Unit Anti-Lock Brake
- Replaces: 52128138AD
- Item Weight: 2.20 Pounds
- Item Dimensions: 8.8 x 7.6 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52128138AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Cherokee Submodels:
- Classic, Country, Limited, SE, Sport | 2.5L L4, 4 Cyl 2.5 L GAS, 4.0L L6, 6 Cyl 4.0 L GAS

2000 Jeep Cherokee ABS Control Module Parts and Q&A

Q: How to Service and Repair the ABS Control Module for Antilock Brakes on 2000 Jeep Cherokee?
A: To repair the Hydraulic Control Assembly for Antilock Brakes, remove the pump motor connector from the CAB and remove the mounting screws from the HCU and finally remove the CAB from the HCU. Attach the CAB onto the HCU, tighten the CAB mounting screws to 1.5 Nm (16 inch lbs.) and after that, plug back in the pump motor to the CAB.