How to Remove and Install a Throttle Position Sensor (TPS) on 2000 Jeep Cherokee?

In order to disassemble Throttle Position Sensor (TPS), loosen the air cleaner tube and electronic connector, and unscrew the TPS. To install, make sure the throttle shaft enters the TPS socket and with some degree of rotation. Screwdriver Tighten the screws to 7 Nm, then reconnect the electrical connector and ensure there is no binding and then reconnect the air cleaner tube.

OEM 2000 Jeep Cherokee Throttle Position Sensor

TPS Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Throttle Position Sensor found

View related parts
2000 Jeep Cherokee Throttle Position Sensor Part Number: 68433984AA
$102.36 MSRP: $156.00
You Save: $53.64 (35%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Throttle Position; Throttle Positionition Sensor; Throttle Sensor
- Replaces: 4874371AC
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.2 x 2.6 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68433984AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Cherokee Submodels:
- Classic, Limited, SE, Sport | 2.5L L4, 4 Cyl 2.5 L GAS, 4.0L L6, 6 Cyl 4.0 L GAS

2000 Jeep Cherokee Throttle Position Sensor Parts and Q&A

Q: How to Remove and Install a Throttle Position Sensor (TPS) on 2000 Jeep Cherokee?
A: In order to disassemble Throttle Position Sensor (TPS), loosen the air cleaner tube and electronic connector, and unscrew the TPS. To install, make sure the throttle shaft enters the TPS socket and with some degree of rotation. Screwdriver Tighten the screws to 7 Nm, then reconnect the electrical connector and ensure there is no binding and then reconnect the air cleaner tube.