How to Maintain and Fix an Oxygen Sensor on 2000 Jeep Cherokee?

To repair the oxygen sensor, avoid grease on the connector and soldering the wiring harness. Allow exhaust components to cool, then raise the vehicle and disconnect the O2S sensor. Use a removal tool, clean the threads, and install the new sensor without adding anti-seize. Tighten to 30 Nm and reconnect.

OEM 2000 Jeep Cherokee Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oxygen Sensors found

View related parts
2000 Jeep Cherokee Oxygen Sensor, Front Driver Side Part Number: 56041213AF
$132.51 MSRP: $199.00
You Save: $66.49 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Left; Rear Oxygen Sensor; Front Oxygen Sensor; Sensor Oxygen
- Position: Front Driver Side
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.1 x 1.0 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041213AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Cherokee Submodels:
- SE | 4 Cyl 2.5 L GAS
View related parts
2000 Jeep Cherokee Oxygen Sensor, Rear Part Number: 56041212AE
$132.51 MSRP: $197.00
You Save: $64.49 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Right, Rear; Front Oxygen Sensor; Sensor Oxygen
- Position: Rear
- Item Weight: 0.60 Pounds
- Item Dimensions: 20.2 x 2.1 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041212AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Cherokee Submodels:
- Classic, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

2000 Jeep Cherokee Oxygen Sensor Parts and Q&A

Q: How to Maintain and Fix an Oxygen Sensor on 2000 Jeep Cherokee?
A: To repair the oxygen sensor, avoid grease on the connector and soldering the wiring harness. Allow exhaust components to cool, then raise the vehicle and disconnect the O2S sensor. Use a removal tool, clean the threads, and install the new sensor without adding anti-seize. Tighten to 30 Nm and reconnect.